DeepSleep Wakeup does not work anymore - very confusing
Posted: 15 Aug 2019, 19:34
Hi all,
I am using a D1 Mini Pro (16MB) and the latest Espeasy Mega release Release mega-20190813
My Settings: (for testing)
Sensor HC-SR04
GPIO16 connected to RST
Sleep awake time 40 seconds
Sleep time 30 seconds
The wake up worked (!) like a charm multiple times...but for any reason it does not work anymore and I have no idea why.
GPIO16 is definitely connected to RST (checked with Multimeter)
When I power on the D1 it boots, stays alive, Hc-sr04 sends Data to FHEM via Connector and then it goes to DeepSleep. That's it. It won't come up again. The blue LED is on, it does not flicker or anything.
Power supply is stable, tried another one, too.
What could be the problem?
If anyone could help me, that would be great.
Thanks!
I am using a D1 Mini Pro (16MB) and the latest Espeasy Mega release Release mega-20190813
My Settings: (for testing)
Sensor HC-SR04
GPIO16 connected to RST
Sleep awake time 40 seconds
Sleep time 30 seconds
The wake up worked (!) like a charm multiple times...but for any reason it does not work anymore and I have no idea why.
GPIO16 is definitely connected to RST (checked with Multimeter)
When I power on the D1 it boots, stays alive, Hc-sr04 sends Data to FHEM via Connector and then it goes to DeepSleep. That's it. It won't come up again. The blue LED is on, it does not flicker or anything.
Power supply is stable, tried another one, too.
What could be the problem?
If anyone could help me, that would be great.
Thanks!