Dummy - the value does not change

Message

a_k · #1 Post by **a_k** » 16 Aug 2019, 09:21

Hello, everyone.

I have a problem. After the command is given:

http://192.168.1.194/t.esp?cmd=TaskValueSet,3,1,25.88

The value remains unchanged ( 0.00 ). Temperature reads well from ds18b20. Unfortunately, it's not enrolled in the dummy

Git Build: mega-20190813

grovkillen · #2 Post by **grovkillen** » 16 Aug 2019, 17:25

t.esp, what's that?

a_k · #3 Post by **a_k** » 18 Aug 2019, 18:50

@grovkillen html files.

grovkillen · #4 Post by **grovkillen** » 18 Aug 2019, 19:35

But why are you trying to send commands to that one?

https://espeasy.readthedocs.io/en/lates ... mmand.html

a_k · #5 Post by **a_k** » 18 Aug 2019, 20:23

I want the command to update my data in dummy and then she went to the address 192.168.1.194/t.esp

grovkillen · #6 Post by **grovkillen** » 18 Aug 2019, 21:57

You should use the /control url to send commands.

a_k · #7 Post by **a_k** » 19 Aug 2019, 09:19

It's not working. The page is refreshing and the dummy value remains unchanged.

grovkillen · #8 Post by **grovkillen** » 19 Aug 2019, 12:33

Show the exact url you're posting

a_k · #9 Post by **a_k** » 19 Aug 2019, 16:23

http://192.168.1.194/t.esp?cmd=TaskValueSet,3,1,[10P#Temperature]

This is the button in the t.esp file.

<a class='button link' href="http://192.168.1.194?cmd=TaskValueSet,3,1,[10P#Temperature]">T</a>

grovkillen · #10 Post by **grovkillen** » 19 Aug 2019, 17:41

http://192.168.1.194/command?cmd=TaskValueSet,3,1

If you read the document page I liked to you see that you're not using the correct URL.