Let's Control It

hi together

can someone explain me why i have this entrys in the mqtt instance of iobroker.
i can't get the solution.
i want to check the value of a io input of a wemos with espeasy on it.

see the att. picture

many thanks
pat

The LWT you mean?

thats the other question....

why are entries with LWT in the mqtt broker, but on the espeasy i didn't fill it out...

So what is the first problem?

Ok
Why the LWT entries there?

Have you restarted the unit with these settings?

Yes, i have several times restart the device. But always this entries

If you test to add something to the topic and messages, save, remove the topics and messages, save again.

i remove the topics in iobroker and change the GPIO on the Wemos.
The Entrys in iobroker are as follow:
so i think it's ok.
when i now reboot the ESP, i habe the following entrys:
How can i place the topic inside the STATE topic? Why is there a new entry "mqtt"?
i think it's better also inside the "mqtt.0"

thanks
pat

What version are you using?

i think you mean the esp:

mega-20190830

thanks
pat

Then open an issue on GitHub.

ok i will try this...(don't know how... ) we will see

thanks
pat