Rules - command to print a value to the Log?
Posted: 16 Oct 2019, 20:58
Is there such a command? Got an illusive problem with a sprinkler system.
------------------
My problem is below, when it gets to Rules#Timer=6 - it does not evaluate the if statement, I want to know what INT#!'s value is....
-----
------------------
My problem is below, when it gets to Rules#Timer=6 - it does not evaluate the if statement, I want to know what INT#!'s value is....
-----
Code: Select all
On Clock#Time=All,"[Vars1#startHr#D2]:[Vars1#startMin#D2]" do // On Clock#Time=All,%sunrise+15m% Do
Let,1,0
if [Vars2#Auto]=1
Event,LoopDeLoop
endif
EndOn
On LoopDeLoop Do
Let,1,[VAR#1#D1.0]+1
Let,2,[Vars2#durLegRest]+[Vars2#durLegOn]
event,L[VAR#1#D1.0]
timerSet,6,[VAR#2]
EndOn
On Rules#Timer=6 Do
if [INT#1]<5 // or use [VAR#1#D1.0]
Event,LoopDeLoop
endif
EndOn