OLED SSD1306/SH1106 Framed: Prevent automatic "step through pages"
Posted: 10 Jan 2021, 11:03
Is there any possibility with the "OLED SSD1306/SH1106 Framed" to prevent the automatic step through pages?
I want to control this only by external triggers (via rules & dummy device). This works well, but additionally there is a step to the next page after <Interval> seconds.
- I thought, setting "Interval = 0" will be do that - but 0s is always replaced by 60s
- Next, I tried to assign an unused Pin as "Display Button" - but the automatic step through stays active, too
Thanks
I want to control this only by external triggers (via rules & dummy device). This works well, but additionally there is a step to the next page after <Interval> seconds.
- I thought, setting "Interval = 0" will be do that - but 0s is always replaced by 60s
- Next, I tried to assign an unused Pin as "Display Button" - but the automatic step through stays active, too
Thanks