BerndJ from germany

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
BerndJ
Normal user
Posts: 86
Joined: 28 Sep 2015, 06:57

BerndJ from germany

#1 Post by BerndJ » 06 Oct 2015, 15:53

Hi @ all,

my name is Bernd and i´m living in the north of germany, near Hamburg.

58 yrs old sack just like Bert, the hole time a little bit crazy regarding homecontrol. tech and business degrees.

And no, i dont use domoticz, heart 2 weeks ago while i´m stumpled about yr projekt.

Using IP-Symcon http://www.symcon.de.

They had a wonderful frequented forum, see: https://www.symcon.de/forum/

espEasy, fantastic work, thx a lot.

Hope u expand these projekt,
ideas are:
ArtNet to dmx on selectable pin (that would be the lowest-cost controler ever seen),
PWM via I2C; PCA9532
and more other.

Using some esp´s with yr firm V029, protocol 1, Domotics HTTP and read it via socket server under IPS.
After receiving values, must i send something back? :roll: for ack.


best wishes from the elbe

BerndJ

BertB
Normal user
Posts: 1049
Joined: 25 Apr 2015, 14:39

Re: BerndJ from germany

#2 Post by BertB » 05 Nov 2015, 21:22

Hello Bernd,
A little late but hey, what can you expect from an old sack. The tend to be a little slow ;-). Please feel welcome here.

muxlux
New user
Posts: 2
Joined: 02 Feb 2016, 05:05

Re: BerndJ from germany

#3 Post by muxlux » 03 Feb 2016, 00:23

BerndJ wrote: ideas are:
ArtNet to dmx on selectable pin (that would be the lowest-cost controler ever seen),
any advances on the ArtNet front?
i have some ttl to rs-485 modules that i'm attempting to drive with an esp-01

this firmware IS nice!

BerndJ
Normal user
Posts: 86
Joined: 28 Sep 2015, 06:57

Re: BerndJ from germany

#4 Post by BerndJ » 03 Feb 2016, 01:25

Hi,

.....any advances on the ArtNet front?.....

No, had some problems ser2net at moment

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests