Hello from Holland - Martinus
Posted: 29 Mar 2020, 14:04
Since I'm sort of back after quite some time, it may be needed to reintroduce myself (?)
My history with ESPEasy goes all the way back to the Nodo project where it all started in 2011. I was the initial founder of ESPEasy until I handed over the project to Edwin and later on to Gijs and Jimmy.
And all three have done a really terrific job to improve ESPEasy in every possible way!
My Home Automation mainly consists of:
* Domoticz 4.10717 and Mosquitto running on a very low power Windows 10 HDMI stick
* Klik Aan/Klik Uit on some less important locations
* Philips Hue in the living room with a motion sensor and a dimmer switch
* Lots of ESP-01, Wemos D1 Mini, Lolin-32 lite, Wemos D1 Mini-32 and M5-stack modules
* Mainly DS18B20, SI7021 sensors
Obsolete items:
* A broken DKW2012 Weatherstation that still needs to be replaced (?)
* An RFID reader node that never went into production (WAF issue)
* DHT sensors because they were replaced with SI7201
* Some Sonoff basic modules that have issues with Wifi range and reliability (all 3 of them) . Will be replaced with LSC smart plug
* A whole range of devices that were needed to develop plugins but never seemed of any use to my personal HA requirements.
Main skills:
* Prototyping in every possible way (stuff often stays at that level but still in production)
* Basic level of C programming, HTML, PowerShell, MS-DotNet framework
* Z80, ATTiny85, ATMega328, ATMega2560, W5100, ESP8266, ESP32
* Testing until it drives me nuts But at the end it works
* Spending more time on my hobby than the WAF allows...
I'm in the progress of migrating all my Home Automation components to the most recent hardware where possible. ESP32 will be my main choice, preferably with 16MB flash, so i will not have to refresh again too soon. Also migrated from R120/R147 to Mega build 200204. Only my custom wordclock is still on R120.
To avoid possible confusion: I'm no longer a member of the ESPEasy development team, so i'm just a regular member like all the other enthousiastic users on this forum.
Martinus
My history with ESPEasy goes all the way back to the Nodo project where it all started in 2011. I was the initial founder of ESPEasy until I handed over the project to Edwin and later on to Gijs and Jimmy.
And all three have done a really terrific job to improve ESPEasy in every possible way!
My Home Automation mainly consists of:
* Domoticz 4.10717 and Mosquitto running on a very low power Windows 10 HDMI stick
* Klik Aan/Klik Uit on some less important locations
* Philips Hue in the living room with a motion sensor and a dimmer switch
* Lots of ESP-01, Wemos D1 Mini, Lolin-32 lite, Wemos D1 Mini-32 and M5-stack modules
* Mainly DS18B20, SI7021 sensors
Obsolete items:
* A broken DKW2012 Weatherstation that still needs to be replaced (?)
* An RFID reader node that never went into production (WAF issue)
* DHT sensors because they were replaced with SI7201
* Some Sonoff basic modules that have issues with Wifi range and reliability (all 3 of them) . Will be replaced with LSC smart plug
* A whole range of devices that were needed to develop plugins but never seemed of any use to my personal HA requirements.
Main skills:
* Prototyping in every possible way (stuff often stays at that level but still in production)
* Basic level of C programming, HTML, PowerShell, MS-DotNet framework
* Z80, ATTiny85, ATMega328, ATMega2560, W5100, ESP8266, ESP32
* Testing until it drives me nuts But at the end it works
* Spending more time on my hobby than the WAF allows...
I'm in the progress of migrating all my Home Automation components to the most recent hardware where possible. ESP32 will be my main choice, preferably with 16MB flash, so i will not have to refresh again too soon. Also migrated from R120/R147 to Mega build 200204. Only my custom wordclock is still on R120.
To avoid possible confusion: I'm no longer a member of the ESPEasy development team, so i'm just a regular member like all the other enthousiastic users on this forum.
Martinus