RFLink R42, strange Debug output breaks parser
Posted: 14 Jul 2016, 22:33
Hello,
i using the R42 firmware and getting some strange "Debug" outputs that are breaking the protocol parser:
Bests
NemoN
i using the R42 firmware and getting some strange "Debug" outputs that are breaking the protocol parser:
Any ideas?Welcome to minicom 2.7
OPTIONS: I18n
Compiled on Jan 1 2014, 17:13:19.
Port /dev/ttyACM0, 22:27:20
Press CTRL-A Z for help on special keys
0;Alecto V4;ID=5f58;TEMP=008e;HUM=83;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R42;
20;01;GlobalTronics;ID=0032;TEMP=0089;BAT=LOW;
Debug aaaa55000f9a00
20;02;RTS;ID=0f959a;SWITCH=01;CMD=ON;
20;03;Polling DBG;5be013510e;
20;04;Auriol V2;ID=3F01;TEMP=008a;BAT=LOW;
20;05;Alecto V4;ID=5f58;TEMP=008d;HUM=83;
20;06;UPM_Esic;ID=0003;TEMP=008f;HUM=00;BAT=OK;
Debug aaaad500000b01
20;07;OregonV1;ID=0083;TEMP=00a4;BAT=OK;
20;08;Polling DBG;5be013510e;
20;09;Polling DBG;5be013510e;
20;0A;Polling DBG;5be013510e;
20;0B;Polling DBG;5be013510e;
20;0C;GlobalTronics;ID=0032;TEMP=0089;BAT=LOW;
20;0D;Alecto V4;ID=5f58;TEMP=008d;HUM=83;
Bests
NemoN