Send custom packet

Information and news about RFLink development and releases

Moderators: Voyager, BertB, rtenklooster, Stuntteam

Post Reply
Message
Author
Romeo
Normal user
Posts: 13
Joined: 15 Dec 2016, 22:06

Send custom packet

#1 Post by Romeo » 15 Mar 2017, 15:22

Hi,

Just a suggestion.
Is it possible to send a custom raw packet on air in a next release ?
I know the right sentence I have to send for a specific device (protocol not known, not supported), but I'm not able to put it on air via rflink. I have not control or method to manage my trx433 on the rflink board.
I must use another rf433 for it on a second board or raspberry.

Via rflink, it should be for example.

10;TxCustomPacket=h200,l400,l400,h200.....;
h high pulse
l low pulse
and length

or save the sentence in epprom
and call it
10;TxCustomPacket=#1;


or something similar

Thanks in advance.

User avatar
Stuntteam
Site Beheer
Posts: 601
Joined: 27 Jan 2016, 16:46

Re: Send custom packet

#2 Post by Stuntteam » 15 Mar 2017, 16:47

check your email..
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

Romeo
Normal user
Posts: 13
Joined: 15 Dec 2016, 22:06

Re: Send custom packet

#3 Post by Romeo » 16 Mar 2017, 07:12

Did you received my reply by email ?

Romeo
Normal user
Posts: 13
Joined: 15 Dec 2016, 22:06

Re: Send custom packet

#4 Post by Romeo » 19 Dec 2017, 13:53

Hello,

Maybe, another way should be to have a "Auto Learn Mode" for any raw data packet.
I know there is already the "RfFind" feature, but available only for a couple of protocol known.
The idea should be to grab the raw data packets regardless of the protocol.
Something like 10;AutoLearn=on
Push a button on the remote control.
RFlink should display the packet like RFDebug feature
We could store this packet with ID# and afterwards could replay this packet.

Easy to say as suggestion, but how to do it ?

billyjackson
Normal user
Posts: 2
Joined: 29 Jan 2018, 17:51

Re: Send custom packet

#5 Post by billyjackson » 10 May 2018, 21:37

As far as I know - this is almost impossible to do. You you have already found the solution?
I really like this site

ag74
Normal user
Posts: 2
Joined: 14 Feb 2019, 11:18

Re: Send custom packet

#6 Post by ag74 » 14 Feb 2019, 13:14

Hello,

@stuntteam:
You replied by email so I guess it is possible to send custom packets using an undocumented command.
I also needs this feature to send command to a wireless stove management I'm developping.

So is it possible to send custom packets ?

Thanks

User avatar
Stuntteam
Site Beheer
Posts: 601
Joined: 27 Jan 2016, 16:46

Re: Send custom packet

#7 Post by Stuntteam » 14 Feb 2019, 14:31

No, we do not have fully custom packets. We only have the rffind feature for now.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

shyriu42
Normal user
Posts: 6
Joined: 24 Feb 2019, 14:38

Re: Send custom packet

#8 Post by shyriu42 » 02 Mar 2019, 14:39

hi

could you implement something like rcswitch on arduino in rflink because i need to send this

10;Doorbell;ID=1e94;SWITCH=1;CMD=ON;CHIME=01;

20;25;CMD UNKNOWN;
------------------------

and this not working on rflink but with rcswitch i can ring the bell


with this arduino sketch :

////

Code: Select all

#include <RCSwitch.h>

....
mySwitch.setProtocol(1);

 //Optional set pulse length.
 mySwitch.setPulseLength(185);

 //Optional set number of transmission repetitions.
 mySwitch.setRepeatTransmit(3);
 .......
 
  //button 3 
  Serial.println("Envoi Button 3");
  mySwitch.send("101000111101001010000011");
////

with "101 0001111010010100 00011" middle part 0001111010010100 ----> ID= 1e94

10;Doorbell;ID=1e94;SWITCH=1;CMD=ON;CHIME=01;


and thanks for sharing and your project.

ps: are answering to your email ? franck....@gmail.com

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests