Documentation of RFLink transmit support

Information and news about RFLink development and releases

Moderators: Voyager, BertB, rtenklooster, Stuntteam

Post Reply
Message
Author
CMarkwardt
Normal user
Posts: 1
Joined: 04 Jun 2018, 22:19

Documentation of RFLink transmit support

#1 Post by CMarkwardt » 04 Jun 2018, 22:48

Hello--

I am trying to provide interface support between RFLink and the FHEM software. So far, mostly good.

FHEM has the capability to display different kinds of graphical widgets if the device supports different kinds of commanding. For example, an on/off button for switches, a slider for dimmers, etc.

But it does not make sense to display a widget if the device does not support that kind of commanding. How do we as developers know if RFLink supports transmitting to a device? I cannot find much documentation. I can't even find a full list of device devices.

I went through the sample code to find examples of device names, and received (RXCMD) and transmitted (TXCMD) commands. Here is the best I can do. Can these be confirmed? Are there more devices and/or commands? Perhaps this can be enhanced and documented with all allowed device types and available commands.

Thanks.

Code: Select all

Plugin_001.c:DEBUG
Plugin_002.c:LaCrosseV2

Plugin_003.c:Kaku
Plugin_003.c:AB400D
Plugin_003.c:Impuls
Plugin_003.c:Sartano
Plugin_003.c:Impuls
Plugin_003.c:PT2262
Plugin_003.c:TriState
  TXCMD=ON|OFF|ALLON|ALLOFF

Plugin_004.c:NewKaku
  TXCMD=ON|OFF|ALLON|ALLOFF|SET_LEVEL=0-15

Plugin_005.c:Eurodomest
  TXCMD=ON|OFF|ALLON|ALLOFF

Plugin_006.c:Blyss
Plugin_006.c:Avidsen
  TXCMD=ON|OFF|ALLON|ALLOFF

Plugin_007.c:Conrad
  TXCMD=ON|OFF|ALLON|ALLOFF

Plugin_008.c:Kambrook
  TXCMD=ON|OFF

Plugin_009.c:X10
  TXCMD=ON|OFF|ALLON|ALLOFF|BRIGHT|DIM

Plugin_010.c:TRC02RGB
  RXCMD=ON|OFF|DIM UP|DIM DOWN|COLORMIX UP|COLORMIX DOWN|COLOR RED|COLOR BLUE|COLOR YELLOW|COLOR GREEN|SET_LEVEL=0-15

Plugin_011.c:HomeConfort
  TXCMD=ON|OFF|ALLON|ALLOFF

Plugin_012.c:FA500
  TXCMD=ON|OFF

Plugin_013.c:Powerfix
  RXCMD=ON|OFF|ALLON|ALLOFF|BRIGHT|DIM
  TXCMD=ON|OFF|ALLON|ALLOFF

Plugin_014.c:Ikea Koppla
  RXCMD=ON|OFF|BRIGHT|DIM|SET_LEVEL=0-15
  TXCMD=ON|OFF

Plugin_015.c:HomeEasy
  TXCMD=ON|OFF|ALLON|ALLOFF

Plugin_030.c:Alecto V1
Plugin_031.c:Alecto V3
Plugin_032.c:Alecto V4
Plugin_033.c:Conrad
Plugin_034.c:Cresta
Plugin_035.c:Imagintronix
Plugin_040.c:Mebus
Plugin_041.c:LaCrosseV3
Plugin_042.c:UPM/Esic
Plugin_042.c:UPM/Esic F2
Plugin_043.c:LaCrosse
Plugin_044.c:Auriol V3
Plugin_045.c:Auriol
Plugin_046.c:Auriol V2
Plugin_046.c:Xiron
Plugin_048.c:OregonV1
Plugin_048.c:Oregon Temp
Plugin_048.c:Oregon TempHygro
Plugin_048.c:Oregon BTHR
Plugin_048.c:Oregon Rain
Plugin_048.c:Oregon Rain2
Plugin_048.c:Oregon Wind
Plugin_048.c:Oregon Wind2
Plugin_048.c:Oregon UVN128/138
Plugin_048.c:Oregon UVN800
Plugin_048.c:Oregon Unknown

Plugin_060.c:X10
  RXCMD=ON

Plugin_061.c:EV1527
  RXCMD=ON
  TXCMD=ON|OFF (web page)

Plugin_062.c:Chuango
  RXCMD=ON
  TXCMD=ON|OFF|ALLON|ALLOFF

Plugin_063.c:X10
  RXCMD=ON

Plugin_070.c:SelectPlus
  RXCMD=ON
  TXCMD=(none=bare)

Plugin_071.c:Plieger
  RXCMD=ON

Plugin_072.c:Byron SX
  TXCMD=ON

Plugin_073.c:Deltronic
  TXCMD=ON

Plugin_074.c:Byron MP
  TXCMD=ON

Plugin_075.c:SilverCrest
  RXCMD=ON

Plugin_080.c:FA20RF
  SMOKEALERT=ON
  TXCMD=ON
  (web)TXCMD=ON|OFF|ALLON|ALLOFF

Plugin_082.c:Mertik
  RXCMD=ON|OFF|UP|DOWN|GOUP|GODOWN|STOP
  TXCMD=ON|OFF|UP|DOWN|GO_UP|GO_DOWN|STOP

Plugin_090.c:Slave
Plugin_100.c:DKW2012
Plugin_100.c:Alecto V2
Plugin_101.c:OregonV1
Plugin_101.c:Oregon Temp
Plugin_101.c:Oregon TempHygro
Plugin_101.c:Oregon BTHR
Plugin_101.c:Oregon Rain
Plugin_101.c:Oregon Rain2
Plugin_101.c:Oregon Wind
Plugin_101.c:Oregon Wind2
Plugin_101.c:Oregon UVN128/138
Plugin_101.c:Oregon UVN800
Plugin_101.c:Oregon Unknown
Plugin_254.c:DEBUG

Only documented on RFLink web page, not visible in sample source code:

Code: Select all

Uknown____.c|RTS
  (web page)CMD=ON|OFF|UP|DOWN

Unknown___.c|Milightv1
  (web page)CMD=ON|OFF|ALLON|ALLOFF|BRIGHT|DISCO+|DISCO-|MODEn

Unknown___.c|UNITEC
  (web page)CMD=ON

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest