ESP Easy development status
Moderators: rtenklooster, Voyager, BertB, Stuntteam
ESP Easy development status
Dear all,
Due to personal reasons, i have to stop active development on ESP Easy. So this would be a good moment to hand over the project maintenance to members of the community. If anyone wants to take over the project control on github, please contact me by PM, so i can add you as a team member of the github letscontrolit organization.
All my work, including all experimental stuff, is available on github as of now: https://github.com/letscontrolit
Wish you all the best for 2017!
Best regards,
Martinus
Due to personal reasons, i have to stop active development on ESP Easy. So this would be a good moment to hand over the project maintenance to members of the community. If anyone wants to take over the project control on github, please contact me by PM, so i can add you as a team member of the github letscontrolit organization.
All my work, including all experimental stuff, is available on github as of now: https://github.com/letscontrolit
Wish you all the best for 2017!
Best regards,
Martinus
Re: ESP Easy development status
Martinus wrote:Dear all,
Due to personal reasons, i have to stop active development on ESP Easy. So this would be a good moment to hand over the project maintenance to members of the community. If anyone wants to take over the project control on github, please contact me by PM, so i can add you as a team member of the github letscontrolit organization.
All my work, including all experimental stuff, is available on github as of now: https://github.com/letscontrolit
Wish you all the best for 2017!
Best regards,
Martinus
Thanks for all the good work, and i wish you the best for the future.
Herman
Re: ESP Easy development status
Sorry to hear that..
Perhaps some day you pick up where you left off..
take care!
Perhaps some day you pick up where you left off..
take care!
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Normal user
- Posts: 103
- Joined: 16 Sep 2015, 20:32
Re: ESP Easy development status
Unpleasent surprise beginning 2017Martinus wrote: Due to personal reasons, i have to stop active development on ESP Easy.
Thanks for the support and software, I'm afraid your knowledge will be missed.
I sure hope you find a worthy and integer successor.Martinus wrote: So this would be a good moment to hand over the project maintenance to members of the community. If anyone wants to take over the project control on github, please contact me by PM, so i can add you as a team member of the github letscontrolit organization.
Re: ESP Easy development status
That is a great shame. This is a fantastic project, thank you very much for your contribution.
Re: ESP Easy development status
Thank you Martinus, you will be sorely missed!
-----------
IOTPLAY. Tinkerer, my projects are @ http://GitHub.com/IoTPlay, and blog https://iotplay.org. Using RPi, Node-Red, ESP8266 to prove Industry 4.0 concepts.
IOTPLAY. Tinkerer, my projects are @ http://GitHub.com/IoTPlay, and blog https://iotplay.org. Using RPi, Node-Red, ESP8266 to prove Industry 4.0 concepts.
Re: ESP Easy development status
Thank you for all the work you did. It has been exactly what I have been looking for after getting serious about home automation.
Good luck
Good luck
Michal 'Kotek', greetings from Poland. Zapraszam na mój blog o automatyce domowej po polsku: http://www.ukotka.com.
Re: ESP Easy development status
Hi Martinus,
I'm sad to see the news...
I want to thank you for the GREAT work, both on the tech and HUMAN standpoints.....
I wish you all the best for yr life.....
regards
paolo
I'm sad to see the news...
I want to thank you for the GREAT work, both on the tech and HUMAN standpoints.....
I wish you all the best for yr life.....
regards
paolo
Re: ESP Easy development status
Good Luck Martinus, I'm relatively new with ESPEasy but learnt a lot and I'm sure project will continue with such a great community!
I know exactly what means giving priorities to other areas of your life, so I am sure it's for the best of you!! Take care!
I know exactly what means giving priorities to other areas of your life, so I am sure it's for the best of you!! Take care!
My TINDIE Store where you can find all ESP8266 boards I manufacture --> https://www.tindie.com/stores/GiovanniCas/
My Wiki Project page with self-made PCB/devices --> https://www.letscontrolit.com/wiki/inde ... :Papperone
My Wiki Project page with self-made PCB/devices --> https://www.letscontrolit.com/wiki/inde ... :Papperone
Re: ESP Easy development status
This is very unfortunate but real life comes first. I hope you can solve the issues you ran into, and we see you again on the forum.
Re: ESP Easy development status
I'm so sorry to hear this.
Thank you very much for all the work you did on ESPEASY.
We will miss you, for sure. I hope somebody takes over ESPEASY and gives continuity to it.
Thank you very much for all the work you did on ESPEASY.
We will miss you, for sure. I hope somebody takes over ESPEASY and gives continuity to it.
DIY CO2 monitor with ESP Easy at https://emariete.com/medidor-casero-co2/
ESP Easy related info at my blog: https://emariete.com/tag/espeasy/
ESP Easy related info at my blog: https://emariete.com/tag/espeasy/
Re: ESP Easy development status
This is a really bad news, but real life comes first always.
We will for sure miss you and your expertise.
Anyways: Many thanks for the work you have done, for all the development and helping.
Let's hope you find a successor who does with the same effort and the same knowledge.
Best whishes for you and your family
Shardan
We will for sure miss you and your expertise.
Anyways: Many thanks for the work you have done, for all the development and helping.
Let's hope you find a successor who does with the same effort and the same knowledge.
Best whishes for you and your family
Shardan
Regards
Shardan
Shardan
Re: ESP Easy development status
Hi Martinus, I'm quite new here but have been using ESPEasy for a little while now and it is awesome. I'm sorry to hear you won't have as much time for it any more.
I'm keen to help out and contribute though, would be awesome to join the github project!
Alex
I'm keen to help out and contribute though, would be awesome to join the github project!
Alex
Re: ESP Easy development status
Hi Martinus,Martinus wrote:Dear all,
Due to personal reasons, i have to stop active development on ESP Easy. So this would be a good moment to hand over the project maintenance to members of the community. If anyone wants to take over the project control on github, please contact me by PM, so i can add you as a team member of the github letscontrolit organization.
All my work, including all experimental stuff, is available on github as of now: https://github.com/letscontrolit
Wish you all the best for 2017!
Best regards,
Martinus
Very sad to hear that you stop the development. I would like to thank you very much for all your effort that you spent on this very interesting project.
I realy love this piece of software
I hope the communicty will continue the development and that you can keep an eye on it in the background (het is immers uw geesteskind zoals ze dit in het nederlands zeggen . )
Veel succes man in uw verdere doen en laten, hopelijk leeft het project verder!
Good luck in the future @Martinus! All the best.
Located in Belgium, Bruges. Working on a full DIY domoticz setup with ESPEasy.
Re: ESP Easy development status
Just read the news.
Hope whatever caused you to take this step will be solved somehow.
Thank you for all the good work.
Hope whatever caused you to take this step will be solved somehow.
Thank you for all the good work.
Re: ESP Easy development status
You leave us a truly impressive body of work. My hat is off to you and I wish you all the best for your other endeavors.
Brian H.
Brian H.
Re: ESP Easy development status
Well stated Brian!
+1+1+1 !!!
+1+1+1 !!!
-----------
IOTPLAY. Tinkerer, my projects are @ http://GitHub.com/IoTPlay, and blog https://iotplay.org. Using RPi, Node-Red, ESP8266 to prove Industry 4.0 concepts.
IOTPLAY. Tinkerer, my projects are @ http://GitHub.com/IoTPlay, and blog https://iotplay.org. Using RPi, Node-Red, ESP8266 to prove Industry 4.0 concepts.
-
- New user
- Posts: 1
- Joined: 22 Jan 2017, 21:48
Re: ESP Easy development status
Hello,Martinus wrote:Dear all,
Due to personal reasons, i have to stop active development on ESP Easy. So this would be a good moment to hand over the project maintenance to members of the community. If anyone wants to take over the project control on github, please contact me by PM, so i can add you as a team member of the github letscontrolit organization.
All my work, including all experimental stuff, is available on github as of now: https://github.com/letscontrolit
Wish you all the best for 2017!
Best regards,
Martinus
Trying to send a PM but can't,
Best Regards
Daniel
-
- New user
- Posts: 4
- Joined: 11 Jan 2017, 08:23
Re: ESP Easy development status
Hi there from the Czech Republic.
For first, thank you very much for your work. I really do like your project and found it very useful.
But one thing makes me unsure. You ended up with the project. I can imagine how much time consuming it should be. Fully underdstand. Is it worth to use EasyESP in long-term running projects? AKA home automation? Currently been considering several ESP projects including this one for my home-automation. Eventually I'm counting with some development contribution. But for me and the others is very important if there is a community behind each project.
So my question is what do you think the future of the project will look like? Thank you again for your hard work! David
For first, thank you very much for your work. I really do like your project and found it very useful.
But one thing makes me unsure. You ended up with the project. I can imagine how much time consuming it should be. Fully underdstand. Is it worth to use EasyESP in long-term running projects? AKA home automation? Currently been considering several ESP projects including this one for my home-automation. Eventually I'm counting with some development contribution. But for me and the others is very important if there is a community behind each project.
So my question is what do you think the future of the project will look like? Thank you again for your hard work! David
Re: ESP Easy development status
Hi Martinus,
I'm very sorry to hear about this, I was here from the very beginning of this great project, thanks again for all hard work and I wish you all best .
I'm very sorry to hear about this, I was here from the very beginning of this great project, thanks again for all hard work and I wish you all best .
Re: ESP Easy development status
Martinus, ik hoop dat het weer goed komt met je! Sterkte man, en enorm veel dank voor het prachtige werk wat je geleverd hebt.
Het gaat je goed.
Jan
Het gaat je goed.
Jan
Re: ESP Easy development status
I think our friend got a lifetime offer in the same branch!
But that is the life path I think!
Kind regards,
Viktor
But that is the life path I think!
Kind regards,
Viktor
Re: ESP Easy development status
What if we all pay an amnt per ESPEasy install - and ask Martinus to keep going where we pay per install to carry on?
-----------
IOTPLAY. Tinkerer, my projects are @ http://GitHub.com/IoTPlay, and blog https://iotplay.org. Using RPi, Node-Red, ESP8266 to prove Industry 4.0 concepts.
IOTPLAY. Tinkerer, my projects are @ http://GitHub.com/IoTPlay, and blog https://iotplay.org. Using RPi, Node-Red, ESP8266 to prove Industry 4.0 concepts.
-
- Normal user
- Posts: 103
- Joined: 16 Sep 2015, 20:32
Re: ESP Easy development status
And that would be quite right, but not our business, mind youbeic wrote:I think our friend got a lifetime offer in the same branch!
The complete code is on github, anybody who want to continue with the project is free to fork it
Re: ESP Easy development status
I'm not mind at all, but little bit sad...NietGiftig wrote: And that would be quite right, but not our business, mind you
Unfortunately, after 1 month past, there is no one to continue his work/steps, and I'm afraid that this beautiful project is abandoned!NietGiftig wrote: The complete code is on github, anybody who want to continue with the project is free to fork it
Kind regards,
Viktor
Re: ESP Easy development status
maybe, it is already quite complete the latest build
Located in Belgium, Bruges. Working on a full DIY domoticz setup with ESPEasy.
-
- Normal user
- Posts: 103
- Joined: 16 Sep 2015, 20:32
Re: ESP Easy development status
Thatś what I was thinking.DeNB3rt wrote:maybe, it is already quite complete the latest build
And those people who think that they can enhance it, please fork it, and tell us about it.
Waiting in anticipation.
Re: ESP Easy development status
Exactly right, you can fork it, or as Martinus said you can join the github project and contribute to the core.NietGiftig wrote: The complete code is on github, anybody who want to continue with the project is free to fork it
I have just joined the community, and the github projectbeic wrote: Unfortunately, after 1 month past, there is no one to continue his work/steps, and I'm afraid that this beautiful project is abandoned!
Re: ESP Easy development status
Personally I'd ruin ESPeasy if I was to contribute with coding, but I'd be happy to donate money if it could ensure the project's future.
Re: ESP Easy development status
Awww..too bad...I just discovered the project a few weeks ago.
Thanks for the great work martinus!
If we just have someone that could merge all the pull requests, the project might continue on.
Since the software architecture is quite nice, i'm willing to try it.
Edwin
Thanks for the great work martinus!
If we just have someone that could merge all the pull requests, the project might continue on.
Since the software architecture is quite nice, i'm willing to try it.
Edwin
-
- Normal user
- Posts: 103
- Joined: 16 Sep 2015, 20:32
Re: ESP Easy development status
You do not merge without good knowledge of the complete system.psy0rz wrote: If we just have someone that could merge all the pull requests, the project might continue on.
Since the software architecture is quite nice, i'm willing to try it.
So a "someone" to merge ?
Merging is not so difficult, but how to guaranty the quality?
Better to fork the existing project and merge the things you like.
-
- Normal user
- Posts: 39
- Joined: 09 Aug 2016, 09:45
Re: ESP Easy development status
A lot of fork is the best way to kill the project ... some one should take the main code
-
- Normal user
- Posts: 103
- Joined: 16 Sep 2015, 20:32
Re: ESP Easy development status
If your fork is reliable people can choose.ayasystems wrote:A lot of fork is the best way to kill the project ... some one should take the main code
Re: ESP Easy development status
Forking isn't the correct solution for this situation: The original project is stalled, we need someone to continue the project.
I've already reviewed a lot of the pull requests that are open and responded to them. Some of those pull requests can be merged with little knowledge of the rest of the project. (since they are simple bugfixes/features)
I will now start reviewing the rest of the code base and determine if I can handle it.
Maybe we should continue the discussion here: viewtopic.php?f=14&t=2617
I've posted more details there.
Edwin
I've already reviewed a lot of the pull requests that are open and responded to them. Some of those pull requests can be merged with little knowledge of the rest of the project. (since they are simple bugfixes/features)
I will now start reviewing the rest of the code base and determine if I can handle it.
Maybe we should continue the discussion here: viewtopic.php?f=14&t=2617
I've posted more details there.
Edwin
Re: ESP Easy development status
(cross post, for people that only follow this thread)
Ok i've pretty much have things up and running.
Have a look at the README over here to see whats going on: https://github.com/psy0rz/ESPEasy/blob/master/README.md
I've already merged a pull request: https://github.com/letscontrolit/ESPEasy/pull/96
If you guys want to test to see if everything is working like you would expect, that would be great.
Please let me know what you think,
Edwin
Ok i've pretty much have things up and running.
Have a look at the README over here to see whats going on: https://github.com/psy0rz/ESPEasy/blob/master/README.md
I've already merged a pull request: https://github.com/letscontrolit/ESPEasy/pull/96
If you guys want to test to see if everything is working like you would expect, that would be great.
Please let me know what you think,
Edwin
-
- Normal user
- Posts: 103
- Joined: 16 Sep 2015, 20:32
Re: ESP Easy development status
I'm glad you forked it, you seem to have some knowledge in this field,
You did exact what I was proposing.
But your actions are not in line with you're statements
You did exact what I was proposing.
But your actions are not in line with you're statements
psy0rz wrote:Forking isn't the correct solution for this situation: The original project is stalled, we need someone to continue the project.
Edwin
Re: ESP Easy development status
This is great.
Are you going to pick up the experimental stuf to?
Are you going to pick up the experimental stuf to?
Re: ESP Easy development status
We're talking about 2 different kind of forks here, it could either mean:
1. There is some disagreement, or someone wants to go a different direction than the original project. Hence the whole PROJECT is forked, starting a new project. Perhaps a different name and perhaps a new site/wiki/forum. (I have no interest in doing that at all.)
2. Someone on is starting work on a temporary branch (github calls it a fork) to continue the project for practical reasons, but is still working on the same project with the same people.
I'm number 2: As soon as I have access to the main repository I will continue there and merge back my changes to the main repository. (since development there stopped this will be very easy since there are no changes to merge)
I still dont have contact with anyone who can help me with that. (Martinus hasn't responded yet, but it's only been a few days since my first message)
Maybe its better this way: People can see what kind of changes I want to make and determine if they like it, before handing over "the keys" so to speak.
Edwin
1. There is some disagreement, or someone wants to go a different direction than the original project. Hence the whole PROJECT is forked, starting a new project. Perhaps a different name and perhaps a new site/wiki/forum. (I have no interest in doing that at all.)
2. Someone on is starting work on a temporary branch (github calls it a fork) to continue the project for practical reasons, but is still working on the same project with the same people.
I'm number 2: As soon as I have access to the main repository I will continue there and merge back my changes to the main repository. (since development there stopped this will be very easy since there are no changes to merge)
I still dont have contact with anyone who can help me with that. (Martinus hasn't responded yet, but it's only been a few days since my first message)
Maybe its better this way: People can see what kind of changes I want to make and determine if they like it, before handing over "the keys" so to speak.
Edwin
NietGiftig wrote:I'm glad you forked it, you seem to have some knowledge in this field,
You did exact what I was proposing.
But your actions are not in line with you're statementspsy0rz wrote:Forking isn't the correct solution for this situation: The original project is stalled, we need someone to continue the project.
Edwin
Re: ESP Easy development status
I would love to add all the experimental plugins that do not require changes to the code base. So keep the base stable, but have an option for users to enable a potential unstable plugin from the webgui.frank wrote:This is great.
Are you going to pick up the experimental stuf to?
Look here to find out about the different releases that contain these experimental plugins: https://github.com/psy0rz/ESPEasy/blob/ ... management
-
- Normal user
- Posts: 103
- Joined: 16 Sep 2015, 20:32
Re: ESP Easy development status
Yes, that's what I intended to say !!psy0rz wrote:
Maybe its better this way: People can see what kind of changes I want to make and determine if they like it, before handing over "the keys" so to speak.
Edwin
Please make an link in your signature with a short explanation, so people go to the temporary fork
Re: ESP Easy development status
Ok sorry. there was a bit of confusion so i wanted to make absolutely clear. (my head is still in coding modeNietGiftig wrote:Yes, that's what I intended to say !!psy0rz wrote:
Maybe its better this way: People can see what kind of changes I want to make and determine if they like it, before handing over "the keys" so to speak.
Edwin
Please make an link in your signature with a short explanation, so people go to the temporary fork
I added a simple signature as well. thanks.
Re: ESP Easy development status
That is great but wat i ment is the experimental stuf like the arduino easy and the arduino mega stufpsy0rz wrote:I would love to add all the experimental plugins that do not require changes to the code base. So keep the base stable, but have an option for users to enable a potential unstable plugin from the webgui.frank wrote:This is great.
Are you going to pick up the experimental stuf to?
Look here to find out about the different releases that contain these experimental plugins: https://github.com/psy0rz/ESPEasy/blob/ ... management
Re: ESP Easy development status
No, I will focus purely on the ESPeasy coding. If someone wants to maintain that stuff but needs some initial help with improving the development process I might be able to do that.
I also dont have time to do the many other things: Maintaining forums and wikis and giving general support, but I assume there are already people that are doing a great job with that? (wiki seems pretty nice so far, and i like the direct links from the webgui in esp easy)
If people prefer some pull requests or playground plugins to be handled first let me know, otherwise I will get the long hanging fruit first. (easy merges with minimal impact on code base)
Edwin
I also dont have time to do the many other things: Maintaining forums and wikis and giving general support, but I assume there are already people that are doing a great job with that? (wiki seems pretty nice so far, and i like the direct links from the webgui in esp easy)
If people prefer some pull requests or playground plugins to be handled first let me know, otherwise I will get the long hanging fruit first. (easy merges with minimal impact on code base)
Edwin
Re: ESP Easy development status
I have contact with Martinus and access to the main repository. Fortunately he will stay involved with the project, but currently doesn't have the time to do any real coding. So he'll be on the background (for now).
I'll keep you posted.
I'll keep you posted.
-
- Normal user
- Posts: 39
- Joined: 09 Aug 2016, 09:45
Re: ESP Easy development status
Thanks psy0rz!
Re: ESP Easy development status
i am getting verry happy from all this good news
But it wood be even beter if someone picks up the expirimental stuf
I can do testing and assist withthe wiki
But it wood be even beter if someone picks up the expirimental stuf
I can do testing and assist withthe wiki
Re: ESP Easy development status
What about the forum? Would be nice if 'we' had multiple sub-groups e.g. per plugin, subjects like 'mqtt', 'openhab','"domoticz', etc.
Also, how to cope with change requests in a structured way?
Also, how to cope with change requests in a structured way?
Re: ESP Easy development status
that would be great with a timeline etc.with wat happens whenmrwee wrote:What about the forum? Would be nice if 'we' had multiple sub-groups e.g. per plugin, subjects like 'mqtt', 'openhab','"domoticz', etc.
Also, how to cope with change requests in a structured way?
Re: ESP Easy development status
It would be great if the current forum admins can make decisions about changes like this and handle it. Maybe you can ask them via pm or something?mrwee wrote:What about the forum? Would be nice if 'we' had multiple sub-groups e.g. per plugin, subjects like 'mqtt', 'openhab','"domoticz', etc.
Also, how to cope with change requests in a structured way?
Re: ESP Easy development status
agreemrwee wrote:What about the forum? Would be nice if 'we' had multiple sub-groups e.g. per plugin, subjects like 'mqtt', 'openhab','"domoticz', etc.
Also, how to cope with change requests in a structured way?
Located in Belgium, Bruges. Working on a full DIY domoticz setup with ESPEasy.
Who is online
Users browsing this forum: No registered users and 0 guests