ESPEasy & BME680

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
Ingo1977
New user
Posts: 5
Joined: 16 Feb 2018, 09:27

ESPEasy & BME680

#1 Post by Ingo1977 » 16 Feb 2018, 09:29

Hello,

I am new to this board here. Welcome from my side.
Is the BME680 already supported by ESPEasy? If so, how to configure?
I have the same question for SR501 Motion sensor.

Thanks Ingo

User avatar
toffel969
Normal user
Posts: 469
Joined: 03 Jan 2017, 10:58
Location: Germany

Re: ESPEasy & BME680

#2 Post by toffel969 » 16 Feb 2018, 11:21

Domoticz on Raspi 2 -- 14 ESP units (hacked Sonoff,NodeMCUs, Wemos, self-built units) running with RC140- Mega 2.0.0 dev8

Domosapiens
Normal user
Posts: 307
Joined: 06 Nov 2016, 13:45

Re: ESPEasy & BME680

#3 Post by Domosapiens » 16 Feb 2018, 11:23

Welcome
For BME680
See: https://github.com/letscontrolit/ESPEas ... Playground

How to configure?

You have to include https://github.com/letscontrolit/ESPEas ... ME680.ino and compile.
How? See Wiki: https://www.letscontrolit.com/wiki/index.php/Main_Page

SR501 Motion sensor:
https://www.letscontrolit.com/wiki/index.php/PIR_Sensor

All found by Google.
Source and Wiki made by a small enthusiastic team.
Your simple type of google questions disturbs their progress.
30+ ESP units for production and test. Ranging from control of heating equipment, flow sensing, floor temp sensing, energy calculation, floor thermostat, water usage, to an interactive "fun box" for my grandson. Mainly Wemos D1.

Ingo1977
New user
Posts: 5
Joined: 16 Feb 2018, 09:27

Re: ESPEasy & BME680

#4 Post by Ingo1977 » 06 Mar 2018, 22:34

Thanks for all your answers but I Need some more help on adding BME680 and CCS811 into an own Firmware.
Haven't done that before but want a Firmware which Supports these sensors. Thanks in advance.
I have a ESP8266 with 4MBytes...

fluppie
Normal user
Posts: 89
Joined: 09 Oct 2015, 13:23

Re: ESPEasy & BME680

#5 Post by fluppie » 12 Mar 2018, 20:49

I was able to compile the mega version from Github with the BME680 plugin from the plugin playground on a Wemos D1 Mini and the BME680 Pimoroni break-out.
Logging to emoncms via MQTT: https://emoncms.org/Edegem/bme680voc

I had to hardcode the I2C address (0x76 in the Pimoroni break-out case) in the plugin as it is using bme.begin() without a variable for the I2C address.

sisamiwe
Normal user
Posts: 14
Joined: 30 Jan 2018, 11:52

Re: ESPEasy & BME680

#6 Post by sisamiwe » 19 Mar 2018, 20:38

Hi,

is there a chance to update the BME680 playground plugin so that also the IAQ can be read out?
The libs of BOSCH and DFRobot provide that by integrating the BSEC. The BSEC is a precompiled BOSCH lib, where the calculations for the IAQ are in.

What do you think?

TD-er
Core team member
Posts: 8643
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: ESPEasy & BME680

#7 Post by TD-er » 20 Mar 2018, 19:03

For feature requests like that, please open an issue on Github.
These requests are almost impossible to find on the forum.

sisamiwe
Normal user
Posts: 14
Joined: 30 Jan 2018, 11:52

Re: ESPEasy & BME680

#8 Post by sisamiwe » 20 Mar 2018, 21:24

OK.

Barb232
Normal user
Posts: 40
Joined: 12 Mar 2016, 16:40
Location: Earth
Contact:

Re: ESPEasy & BME680

#9 Post by Barb232 » 01 Apr 2018, 18:25

There is an update for the BME 680

Bosch Sensortec Environmental Cluster (BSEC) Software

https://www.bosch-sensortec.com/bst/pro ... ducts/bsec

Robin

vidalv
Normal user
Posts: 10
Joined: 18 Sep 2019, 19:31
Location: Courbevoie

Re: ESPEasy & BME680

#10 Post by vidalv » 30 Nov 2019, 11:25

Hi, I ordered a CJMCU-680 including a BME680 sensor. I want to add it to my ESP8266 with ESPEasy.
BME680.JPG
BME680.JPG (30.42 KiB) Viewed 10512 times
What are your suggestions for including it in my project using GIT version v2.0.0-dev13 ?

I found a Github with the file _P119_BME680.ino but it is 2 years old, he has not more recent ?

I've made some trail on Arduino, then the read back for Gaz is Kilo-Ohms !!! Not really a good Air Quality indicator.

I would also like to know what to do for the library BOSCH lib, is it really necessary for the calculations of the IAQ?

Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests