i'm trying to read analog values from a TEMT6000 light sensor, like this one : https://www.sparkfun.com/products/8688
This is on a ESP32 running R20100.
If i'm not mistaken GPIO13 should be ok for wiring, but I would like confirmation ?
Then, which device should i select in the software??
Thx in advance!!
TEMT6000 light sensor / Help needed
Moderators: grovkillen, Stuntteam, TD-er
Re: TEMT6000 light sensor / Help needed
replying to myself, for posterity :
Spent some time digging, the Analog input - internal device seems to be working only with ADC1 ( GPIO32, GPIO33, GPIO34, GPIO35, GPIO36, GPIO39 ).
GPIO13 is on ADC2, i have not gotten anything other than the value 4095 from that pin.
Spent some time digging, the Analog input - internal device seems to be working only with ADC1 ( GPIO32, GPIO33, GPIO34, GPIO35, GPIO36, GPIO39 ).
GPIO13 is on ADC2, i have not gotten anything other than the value 4095 from that pin.
Who is online
Users browsing this forum: No registered users and 37 guests