Hello all
i try to get an folder after root.
but i am not sure how the correct syntax will be ?
i did try :
Testbereich
/Testbereich
/Testbereich/
but nothing worked so far
here is a screenshot:
thank you so much for your help
Sascha
Syntax for OpenHAB folder
Moderators: grovkillen, Stuntteam, TD-er
- Sasch600xt
- Normal user
- Posts: 164
- Joined: 10 Sep 2018, 16:37
Syntax for OpenHAB folder
"the flat earth society has members all around the globe"
- grovkillen
- Core team member
- Posts: 3621
- Joined: 19 Jan 2017, 12:56
- Location: Hudiksvall, Sweden
- Contact:
Re: Syntax for OpenHAB folder
That setting got noting to do with folders or root. It's the topic settings for the MQTT protocol.
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
- Sasch600xt
- Normal user
- Posts: 164
- Joined: 10 Sep 2018, 16:37
Re: Syntax for OpenHAB folder
oh, ok.
then it was a missunderstood of my head
then it was a missunderstood of my head
"the flat earth society has members all around the globe"
Re: Syntax for OpenHAB folder
what is it you're trying to do?
if you want to see what ESP is sending to MQTT so you know how to define your items in openhab then you can sub to mqtt like:
mosquitto_sub -h IPofYOURbroker -t '#'
and then get the ESP to send something. then you'll see exactly what's happening and you can transfer that to openhab
output from mosquitto:
so an item definition in openhab would look like:
if you want to see what ESP is sending to MQTT so you know how to define your items in openhab then you can sub to mqtt like:
mosquitto_sub -h IPofYOURbroker -t '#'
and then get the ESP to send something. then you'll see exactly what's happening and you can transfer that to openhab
output from mosquitto:
Code: Select all
/UtilityRoom/Furnace_Temp/FUR_IN 71.71
/UtilityRoom/furnaceTemp/FUR_OUT 70.81
/UtilityRoom/Evaporator_Temp/EVP_TEMP 71.94
/UtilityRoom/uptime/urUptime 4238.00
/beacon/sensor/journey-signal/state -71
Code: Select all
Number Evap "Furnace evap Temp [%.1f °F]" <temperature> (nestTemps1,gTemps) { mqtt="<[oh2:/UtilityRoom/Evaporator_Temp/EVP_TEMP:state:default]" }
Who is online
Users browsing this forum: No registered users and 44 guests