Yes. I did an upgrade.
And disconnected the power manually during the install.
My Rules:
Code: Select all
on System#Wake do
gpio,14,1
gpio,13,0
endon
On System#Boot do //When the ESP wake up, do
timerSet,1,60 //Set Timer 1 for the next event in 60 seconds
endon
On Rules#Timer=1 do //When Timer1 expires, do
if [Wind#Wind]<20 //When Wind speed less than 20km/h, do
deepsleep,300 //Deepsleep for the next 300 seconds
else
timerSet,1,20 //Add 20 seconds again
endif
endon
Pls say to your developer:
Deepsleep is very unstable.
Energy saving....is not for a ESP8266
All 5min for 60s on is not the solution.
I think, my soluton with Modemsleep is more stable.
What's that? When the blue LED is hard blinking?
Or the 2nd LED is on?
ESP will not reboot after this.
Edit:
ATM it works perfect.If it's thunderstorm is very bad
If you interested:
http://www.ltspiceusers.ch/showthread.php?t=392
(my own board)