Rules (old engine) Rules Set 1/2/3/4

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
JR01
Normal user
Posts: 260
Joined: 14 Feb 2016, 21:04
Location: South Africa

Rules (old engine) Rules Set 1/2/3/4

#1 Post by JR01 » 18 Aug 2019, 13:00

I can not get in any docs the purpose of Rules Set 1 vs 2..4

Q: Are all rules sets active, can I use all 4 of them, each for 2048 characters ?
-----------
IOTPLAY. Tinkerer, my projects are @ http://GitHub.com/IoTPlay, and blog https://iotplay.org. Using RPi, Node-Red, ESP8266 to prove Industry 4.0 concepts.

Domosapiens
Normal user
Posts: 307
Joined: 06 Nov 2016, 13:45

Re: Rules (old engine) Rules Set 1/2/3/4

#2 Post by Domosapiens » 18 Aug 2019, 13:11

Yes, all 4 pages are active.

B.t.w. it would be nice if there was an enable button per rule page for try&test purposes.
30+ ESP units for production and test. Ranging from control of heating equipment, flow sensing, floor temp sensing, energy calculation, floor thermostat, water usage, to an interactive "fun box" for my grandson. Mainly Wemos D1.

JR01
Normal user
Posts: 260
Joined: 14 Feb 2016, 21:04
Location: South Africa

Re: Rules (old engine) Rules Set 1/2/3/4

#3 Post by JR01 » 18 Aug 2019, 16:15

+1

And to send an mqtt msg to enable / dis enable
-----------
IOTPLAY. Tinkerer, my projects are @ http://GitHub.com/IoTPlay, and blog https://iotplay.org. Using RPi, Node-Red, ESP8266 to prove Industry 4.0 concepts.

User avatar
budman1758
Normal user
Posts: 301
Joined: 15 Apr 2017, 05:13
Location: Riverside CA USA

Re: Rules (old engine) Rules Set 1/2/3/4

#4 Post by budman1758 » 18 Aug 2019, 20:38

There has been a request for "selectable rulesets" for quite some time. If it gets more votes it may move up the list of issues getting more attention.

https://github.com/letscontrolit/ESPEasy/issues/659

There is also this forum thread about it.

viewtopic.php?f=4&t=3911
"The glass is twice as big as it needs to be".

AndrewJ
Normal user
Posts: 229
Joined: 14 Feb 2017, 12:38

Re: Rules (old engine) Rules Set 1/2/3/4

#5 Post by AndrewJ » 18 Aug 2019, 21:16

+1

Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 28 guests