I'm french and very happy when i discovered ESPeasy few weeks ago.
I have 8 NodeMCU and lot of sensors, relays, oled, WS2812, DFplayer...
I'm not a noob and made severals DIY projects with them.
One thing make me crazzy.
How can i send a dummy variable from ESPeasy 1 to ESPeasy 2 like this.
(2 ESP8266 are connected to my network, one have DHT22 and other an Oled)
I would like, the more easy possible, send the temperature from ESP 1 (witch is in a dummy variable) to the second ESP (in Dummy variable too).
I try node but i want to use Dummy variables, not just send sensors values.
I said i want to receive temerature from another ESP but in fact i want to send ans receive dummy values between 2 ESP.
I can send events to other ESP but how send variables ?
I read a lot a topics since severals days and try a lot of things but i fail.
I use 2 NodeMCU V3 with ESP_Easy_mega-20191028_normal_ESP8266_4M1M
(Rules enable, UDP 65500, but no controllers in 2 ESPeasy and only Generic Dummy and oled ssd1306 Devices)
I"m happy to read this forum but sorry if this topicis somewhere, i don't read/see it.
If it is easy, sorry for this topic.
I can send a value from my browsher like ()
Browsher :
Code: Select all
http://192.168.0.210/control?cmd=event,Var1=5
Code: Select all
On var1 do
TaskValueSet 2,1,%eventvalue%
endon
Code: Select all
SendToHTTP 192.168.0.2,80/control?cmd=event,Var1=5
Code: Select all
SendTo 2,event,Var1=5
Code: Select all
SendTo 2,event,start_blink
IP of twice ESP are OK.
Best regars.