but i see that also during the day i have at least two automatic reboot.
Close to this ESP i have other two and only this one has this problem, so i would like to exclude connection problems.
how i can discover where is the problem?
i also try to flash a new nodemcu but nothing happen, i also try to use a wemos d1 mini, but same situation.
this is the configuration:
Code: Select all
Unit Number: 204
Local Time: 2019-10-16 14:18:37
Uptime: 0 days 8 hours 5 minutes
Load: 39.40% (LC=2482)
CPU Eco Mode: false
Free Mem: 8376 (6040 - sendContentBlocking)
Free Stack: 3568 (1488 - getPinStateJSON)
Boot: Manual reboot (7)
Reset Reason: Software/System restart
Last Task: Const Interval timer, id: 3
SW WD count: 0
Network ❔
Wifi: 802.11N (RSSI -66 dB)
IP Config: Static
IP / Subnet: 192.168.0.204 / 255.255.255.0
Gateway: 192.168.0.1
Client IP: 192.168.0.4
DNS: 8.8.8.8 / 0.0.0.0
Allowed IP Range: 192.168.0.0 - 192.168.0.255
STA MAC: 3C:71:BF:32:87:D7
AP MAC: 3E:71:BF:32:87:D7
SSID: VodafoneASUS_plus (34:CE:00:7C:65:24)
Channel: 7
Connected: 8h04m
Last Disconnect Reason: (1) Unspecified
Number Reconnects: 0
WiFi Settings
Force WiFi B/G: false
Restart WiFi Lost Conn: true
Force WiFi No Sleep: false
Periodical send Gratuitous ARP: true
Connection Failure Threshold: 5
Firmware
Build:⋄ 20103 - Mega
System Libraries:⋄ ESP82xx Core 2_4_1, NONOS SDK 2.2.1(cfd48f3), LWIP: 2.0.3 PUYA support
Git Build:⋄ mega-20190903
Plugins:⋄ 48 [Normal]
Build Md5: a34e7ef87792844a8cc5948f52dba545
Md5 check: passed.
Build Time:⋄ Sep 3 2019 02:18:27
Binary Filename:⋄ ESP_Easy_mega-20190903_normal_core_241_ESP8266_4M1M.bin
System Status
Syslog Log Level: None
Serial Log Level: None
Web Log Level: None
ESP Board
ESP Chip ID: 3311575 (0x3287D7)
ESP Chip Frequency: 80 MHz
ESP Board Name: PLATFORMIO_ESP12E
Storage
Flash Chip ID: Vendor: 0x20 Device: 0x4016
Flash Chip Real Size: 4096 kB
Flash IDE Size: 4096 kB
Flash IDE Speed: 40 MHz
Flash IDE Mode: DIO
Flash Writes: 0 daily / 0 boot
Sketch Size: 817 kB (2252 kB free)
SPIFFS Size: 934 kB (844 kB free)
Page size: 256
Block size: 8192
Number of blocks: 116
Maximum open files: 5
Maximum path length: 32
if i would like to not use PCF and use directly GPIO to control 8ch relay + 1pulse + 1ds18b20 what GPIO you suggest to use?
thanks