Sonoff new board flashing

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
krzyzaq
Normal user
Posts: 3
Joined: 10 Jan 2020, 09:54

Sonoff new board flashing

#1 Post by krzyzaq » 12 Jan 2020, 18:40

Hello, since I'm new int the board and in the automation do I want to say Hello to all of you.

I have a problem with flashing the ESPEasy to the Sonoff basic - the new board (The one with the four pins 3,3V, TX, RX, GND).
I've used the ESPEasy_mega-20191208 and loaded the firmware ESP_Easy_mega-20191208_normal_ESP8285_1M.bin to the device.
All went ok, but I cant use any of the GPIO's. Some of the ones that should be working as the button relay controller, also the led controller as well I wanted to use the DHT22 to get the temperature. None of them works as it's described in tutorials in internet.
Does anyone knows which firmware should I put to the Sonoff and which GPIO are responsable for wchich elements?
Best regards

User avatar
grovkillen
Core team member
Posts: 3484
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:

Re: Sonoff new board flashing

#2 Post by grovkillen » 12 Jan 2020, 19:14

That version should work. What tutorials do you use?
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:

krzyzaq
Normal user
Posts: 3
Joined: 10 Jan 2020, 09:54

Re: Sonoff new board flashing

#3 Post by krzyzaq » 12 Jan 2020, 20:18

can't find it now, but do you know or have some info where to find the GPIO description - which controls what?

ok, found one:
https://rutg3r.com/sonoff-firmware-tuto ... -esp-easy/
or this:
https://www.domoticz.com/forum/viewtopi ... 0&start=40

User avatar
grovkillen
Core team member
Posts: 3484
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:

Re: Sonoff new board flashing

#4 Post by grovkillen » 12 Jan 2020, 22:10

ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:

krzyzaq
Normal user
Posts: 3
Joined: 10 Jan 2020, 09:54

Re: Sonoff new board flashing

#5 Post by krzyzaq » 12 Jan 2020, 22:28

ok, great, but if I connect dht22 to the 3,3V, GND and Rx, how to read the data from it?

User avatar
grovkillen
Core team member
Posts: 3484
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:

Re: Sonoff new board flashing

#6 Post by grovkillen » 12 Jan 2020, 23:30

You need to turn off the serial (set in the advanced section) and configure it like any other device (set it up on the device page,).
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests