SHT3x - no readings

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
amiable
New user
Posts: 7
Joined: 20 Jan 2020, 15:20

SHT3x - no readings

#1 Post by amiable » 20 Jan 2020, 15:36

Hi, I'm on D1 mini with ESPeasy
Build 20104 - Mega
GIt Build: mega-20191208
Filename: ESP_Easy_mega-20191208_test_ESP8266_4M1M_VCC
There is a SHT30 connected to my D1 mini:
SHT30_2.PNG
SHT30_2.PNG (137.42 KiB) Viewed 12755 times
SHT30_1.PNG
SHT30_1.PNG (125.45 KiB) Viewed 12755 times
Unfortunately, I have never been able to get readings from it.
I'm newbie to ESP and not sure if I connected sensor to D1 correctly.
My connection is:
VIN -> 3.3V power adapter
GND - > ground power adapter
SCL -> GPIO-5
SDA -> GPIO-4

I will be grateful for any advice.

My configuration:
I2C.PNG
I2C.PNG (4.43 KiB) Viewed 12755 times
Devices.PNG
Devices.PNG (16.31 KiB) Viewed 12755 times
Devices2.PNG
Devices2.PNG (13.78 KiB) Viewed 12755 times

User avatar
grovkillen
Core team member
Posts: 3621
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:

Re: SHT3x - no readings

#2 Post by grovkillen » 20 Jan 2020, 16:26

Does the i2c scanner (found under tools) show the sensor?
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:

amiable
New user
Posts: 7
Joined: 20 Jan 2020, 15:20

Re: SHT3x - no readings

#3 Post by amiable » 20 Jan 2020, 16:30

No I2C devices found.

User avatar
grovkillen
Core team member
Posts: 3621
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:

Re: SHT3x - no readings

#4 Post by grovkillen » 20 Jan 2020, 18:11

Then it's up to you to find any hardware errors...?
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:

amiable
New user
Posts: 7
Joined: 20 Jan 2020, 15:20

Re: SHT3x - no readings

#5 Post by amiable » 20 Jan 2020, 20:55

Thanks for the reply.
My fault: it was cold joint on SDA connector :oops: . I noticed only when I used the magnifying glass. I corrected the soldering and now everything works perfectly.

User avatar
grovkillen
Core team member
Posts: 3621
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:

Re: SHT3x - no readings

#6 Post by grovkillen » 20 Jan 2020, 21:37

amiable wrote: 20 Jan 2020, 20:55 Thanks for the reply.
My fault: it was cold joint on SDA connector :oops: . I noticed only when I used the magnifying glass. I corrected the soldering and now everything works perfectly.
Great! ;)
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:

manubis_sanchez
New user
Posts: 9
Joined: 02 Feb 2020, 15:32

Re: SHT3x - no readings

#7 Post by manubis_sanchez » 30 Mar 2020, 15:18

Hello,

Can I ask where do you get the version of ESPeasy with SHT30, please ? Or must I create a new post ?

Thanks

Manubis

TD-er
Core team member
Posts: 8644
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: SHT3x - no readings

#8 Post by TD-er » 30 Mar 2020, 16:28

As you can see here: https://espeasy.readthedocs.io/en/lates ... al-plugins
it is included in the "testing" binary of the nightly builds.

manubis_sanchez
New user
Posts: 9
Joined: 02 Feb 2020, 15:32

Re: SHT3x - no readings

#9 Post by manubis_sanchez » 30 Mar 2020, 17:02

Thanks ! (I forgot there were test firmware in the bin folder :/)
I'm going to test that !

Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 32 guests