2.4 Ghz Ceiling Fan Remote Support

Post here about devices that are not yet or not fully supported

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Normal user
Posts: 2
Joined: 16 Nov 2023, 23:04

2.4 Ghz Ceiling Fan Remote Support

#1 Post by Scoutamis123 » 16 Nov 2023, 23:12

I have a ceiling fan I got from Amazon (there's many copies under multiple different brand names: YUHAO, POCHFAN, etc). It comes with a remote that operates at 2.4 Ghz RF, but RFLink doesn't seem to be picking up any signals from the remote whatsoever. Here's a link to the FCC report on the remote:


Is there anyway I can get this working in RFLink?

User avatar
Site Beheer
Posts: 756
Joined: 27 Jan 2016, 16:46

Re: 2.4 Ghz Ceiling Fan Remote Support

#2 Post by Stuntteam » 17 Nov 2023, 19:16

The short answer: No.

The long answer is that it takes a lot of time and effort to get the signal sorted out. It also would require access to the transmitting device. Right now my limited time goes to improving the current firmware and adding support for devices that are widely used.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests