E-Ink display

[mra2ko]

Hi,
anybody who make something with Good Display GDEY073D46 and similar E-Ink 7.3" and similar?
Or, it is possible use ?
Thank

[Ath]

Your question is very similar to this one: https://letscontrolit.com/forum/viewtop ... 213#p67018 so my answer would be a copy of that

[bidrohini]

Here you will find Plugin details of the ILI9341, ILI9342, ILI9481, ILI9486 and ILI9488 chip families in case you decide to use these displays instead.

https://espeasy.readthedocs.io/en/lates ... /P095.html

[mra2ko]

Thank to info !

[bidrohini]

Your question is very similar to this one: https://letscontrolit.com/forum/viewtop ... 213#p67018 so my answer would be a copy of that

Is the 2.9 Inch e-paper display with screen resolution of 296x128 pixels shown here supported by ESPeasy?
https://www.pcbway.com/project/sharepro ... 75f9a.html

[Ath]

That resolution isn't in the current code, nor in PR #4223, and as I've written before, these controllers are 'poorly' documented (read: no documentation available, at all) to say the least, so don't expect that to work with ESPEasy.

[mra2ko]

Thank to reply, i have other solution, I post it later...