Hi,
Ik heb sinds kort gordijnen met een Forest Shuttle L motor met bij behorende 433 afstandsbediening `Forest Diamond Sense`. Deze afstandsbediening werd eveneens in dit onderwerp genoemd [viewtopic.php?t=9570]. Ik dacht dat deze al ondersteund werd, maar de signalen worden niet herkend.
De firmware zat op revisie 48 en heb ik zojuist geupgraded naar 51. Het werkt al 5 jaar probleemloos met o.a. KAKU. De signalen worden wel opgevangen in DEBUG mode, zie voorbeeld hieronder.
---
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R51
10;version;
20;01;VER=1.1;REV=51;BUILD=01;
10;status;
20;02;STATUS;RF433/868=ON;NodoNRF=OFF;Milight=OFF;LivingColors=OFF;Ansluta=OFF;GPIO=OFF;BLE=OFF;Mysensors=OFF;
20;04;DEBUG;Pulses=511;Pulses(uSec)=180,90,300,300,300,300,120,90,300,300,300,300,90,90,120,90,300,300,300,300,120,90,300,300,120,90,300,300,300,300,300,300,120,90,90,90,120,90,120,90,300,300,120,90,300,300,90,90,300,300,300,300,300,300,300,300,120,90,90,90,120,90,300,300,90,90,120,90,90,90,300,300,120,90,90,90,90,90,300,5280,2100,3900,90,90,300,300,300,300,90,90,300,300,300,300,90,90,120,90,300,300,300,300,120,90,300,300,120,90,300,300,300,300,300,300,120,90,120,90,90,90,120,90,300,300,90,90,300,300,120,90,300,300,300,300,300,300,300,300,90,90,120,90,90,90,300,300,120,90,120,90,90,90,300,300,90,90,120,90,90,90,300,5280,2100,3930,90,90,300,300,300,300,90,90,300,300,300,300,90,90,120,90,300,300,300,300,90,90,300,300,120,90,300,300,300,300,300,300,90,90,90,90,90,90,120,90,300,300,90,90,300,300,120,90,300,300,300,300,300,300,300,300,120,90,90,90,90,90,300,300,120,90,90,90,90,90,300,300,90,90,120,90,90,90,300,5280,2100,3900,90,90,300,300,300,300,90,90,300,300,300,300,120,90,90,90,300,300,300,300,120,90,300,300,120,90,300,300,300,300,300,300,90,90,120,90,120,90,120,90,300,300,120,90,300,300,90,90,300,300,300,300,300,300,300,300,120,90,120,90,120,90,300,300,90,90,120,90,120,90,300,300,90,90,90,90,120,90,300,5280,2100,3900,120,90,300,300,300,300,120,90,300,300,300,300,90,90,120,90,300,300,300,300,90,90,300,300,120,90,300,300,300,300,300,300,90,90,120,90,90,90,120,90,300,300,120,90,300,300,120,90,300,300,300,300,300,300,300,300,90,90,120,90,90,90,300,300,90,90,120,90,90,90,300,300,90,90,120,90,120,90,300,5280,2100,3900,120,90,300,300,300,300,120,90,300,300,300,300,120,90,90,90,300,300,300,300,90,90,300,300,90,90,300,300,300,300,300,300,90,90,90,90,120,90,90,90,300,300,120,90,300,300,120,90,300,300,300,300,300,300,300,300,90,90,120,90,120,90,300,300,90,90,120,90,120,90,300,300,120,90,120,90,120,90,300,5280,2100,3900,120,90,300,300,300,300,120,90,300,300,300,300,90,90,90,90,300,300,300;
---
Kan iemand mij verder helpen? Is deze remote daadwerkelijk ondersteund?
Forest Diamond Sense remote
Moderators: rtenklooster, Voyager, BertB, Stuntteam
Who is online
Users browsing this forum: No registered users and 2 guests