Beginner's questions

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
Smotek7
Normal user
Posts: 175
Joined: 01 Aug 2020, 16:18
Location: SK

Beginner's questions

#1 Post by Smotek7 » 13 Oct 2024, 14:35

I came across the RFlink project here on the ESPeasy forum.
I was quite intrigued by it and would like to try it out, from the drawer supplies.
There is a lot of useful information on the site, but I couldn't answer some of them.
1. is a list of supported devices.
But where can I find which device needs which receiver?

2. I have an Aurel RX 4MHCS/F receiver
can I use the pin 8 output for the RF link as a receiver?

3. I have several Chinese 433Mhz transmitters
When I use them, will RFlink automatically recognize them?

4. I understood the difference between 433.92 and 433.42 for Somfy.
I have some Somfy RTS relays and controllers.
Will it work with 443.92 for a short distance?
Or if I want to operate both 443.92 and 443.42, do I need to build 2x arduino 2560 and for each receiver?

Thank you for your help

bidrohini
Normal user
Posts: 118
Joined: 03 Nov 2022, 16:24

Re: Beginner's questions

#2 Post by bidrohini » 15 Oct 2024, 22:49

3) RFLink does not "automatically recognize" every 433 MHz transmitter. You may have to check in the RFLink logs to see if it detects a signal when the transmitter is activated and, if so, identify its protocol for further use.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests