Lctech relay board

[Tooter]

Hi all. I'm very new to espeasy so pls be gentle with me. I have a lctech relay board the same as this http://www.chinalctech.com/uploads/alli ... 1423-0.jpg I've managed to flash espeasy on the esp-01 micro controller and can access it via http. My question is how do I set it up so I can automatically turn on the relay using a temp sensor when the temp is below a temp and off when above. Thank you for any input.

[chromo23]

My question is how do I set it up so I can automatically turn on the relay using a temp sensor when the temp is below a temp and off when above. Thank you for any input.

Hi,
this is actually quite simple. Add the temperature sensor in the devices page an then also add the level control plugin.

[Tooter]

My question is how do I set it up so I can automatically turn on the relay using a temp sensor when the temp is below a temp and off when above. Thank you for any input.

Hi,
this is actually quite simple. Add the temperature sensor in the devices page an then also add the level control plugin.

Thank you I'll give it a go.