I am using RFlink with hardware from Nodo-Shop. It is the "RFLink Pro" based on
- Arduino Mega Pro Mini 2560 USB-C
Aurel Transceiver 433,92MHz RTX-MID-5V
This is connected to a RaspberryPi that is running ioBroker. All was working fine for over half a year and i can not remember that i changed something in the last weeks but suddenly it stoped working. I do not receive sensor values any more.
After testing a lot in ioBroker without success i decided to connect the "RFlink Pro" to my Desktop-Computer (Windows) and use RFlink Loader V1.11 to test the Hardware. Looks good. I can see sensor data comming in.
Then i connected it to a Notebook (Windows) and use RFlink Loader V1.11 to test the Hardware again. There it seems that communication with the arduino itself is working (i can switch on debug mode and get an answer) but no sensor data is received. I repeated tests on Desktop-Computer and Notebook with the same result. On Desktop it works, on Notebook and RasperryPi it does not work.
During all tests a Sensor was less that 2m away from "RFlink pro" and i waited several minutes.
How can this happen? I have some experience with microcontrollers but i have no explanation for this behaviour so i would be very happy if somebody could help me!
Best regards
uBetz