Two LCD2004 displays lcdcmd controls only one display

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
1i8x6qmtn
New user
Posts: 2
Joined: 06 Nov 2024, 19:55

Two LCD2004 displays lcdcmd controls only one display

#1 Post by 1i8x6qmtn » 06 Nov 2024, 20:03

When I have two 2004 LCD displays connected via I2C with different addresses

The following command manages only one display.

There is no solution that would allow you to control two or more displays separately.
For example, specifying the display name and command to send

Name_LCD_Set_In_ESPEasy,lcdcmd,<value>

TD-er
Core team member
Posts: 9360
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: Two LCD2004 displays lcdcmd controls only one display

#2 Post by TD-er » 06 Nov 2024, 20:18

Close, you need to use a dot ('.') instead of a comma :)

See: https://espeasy.readthedocs.io/en/lates ... f-a-plugin

1i8x6qmtn
New user
Posts: 2
Joined: 06 Nov 2024, 19:55

Re: Two LCD2004 displays lcdcmd controls only one display

#3 Post by 1i8x6qmtn » 06 Nov 2024, 22:40

Thanks its work!

Please update this page and add info about multiple displays 😁

https://espeasy.readthedocs.io/en/lates ... /P012.html

User avatar
Ath
Normal user
Posts: 4008
Joined: 10 Jun 2018, 12:06
Location: NL

Re: Two LCD2004 displays lcdcmd controls only one display

#4 Post by Ath » 06 Nov 2024, 23:08

1i8x6qmtn wrote: 06 Nov 2024, 22:40 Thanks its work!
Great :)
1i8x6qmtn wrote: 06 Nov 2024, 22:40 Please update this page and add info about multiple displays 😁

https://espeasy.readthedocs.io/en/lates ... /P012.html
Well, this is a global feature for any plugin that's being used for multiple tasks and handles commands, so that's why it's documented where it's used/needed most: https://espeasy.readthedocs.io/en/lates ... f-a-plugin
/Ton (PayPal.me)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest