RFLink release 42 is available for download

Information and news about RFLink development and releases

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
User avatar
Stuntteam
Site Beheer
Posts: 787
Joined: 27 Jan 2016, 16:46

RFLink release 42 is available for download

#1 Post by Stuntteam » 09 Jun 2016, 17:39

R42:
- New Device: Mi-Light/LimitlessLED/Applamp bridge functionality (2.4 Ghz, NRF24L01 with Milight wiring required)
- New Device: Hama SD-UN5-RF switch set
- New Device: Acurite Tower sensors
- New Device: Pollin PFR-130 Temperature & Rain meter
- New Device: Gaposa Blind/Shutter control (a.o. model QCT3S)
- New Device: Byron BY35 / BY301
- Added: Command "echo" function to auto create devices without the need of remote controls
- Added: Command "rtsrecclean 9" function to clean a single rolling code table entry
- Added: Command to invert the ON/OFF handling of the Tristate protocol
- Fixed: improved Atlantic MD-210R detection
- Fixed: improved DKW2012 detection to cover variations of the signal
- Fixed: Smarthome YC-4000B detection
- Fixed: improved RTS packet detection to prevent false positives
- Fixed: improved FA500 packet detection to prevent false positives
- Fixed: Modified X10 security sensor packet detection
- Fixed: Modified maximum humidity limit
- Fixed: Improved signal ARC detection
- Fixed: Chacon EMW200 detection
- Fixed: Nexa WST-512 detection
- Fixed: Oregon UV800
- Fixed: CM113 ID
- Added: Support for another MiLight remote variant

the download is available via our blog.
http://www.nemcon.nl/blog2
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

negan
Normal user
Posts: 21
Joined: 05 Apr 2016, 16:39
Location: FR

Re: RFLink release 42 is available for download

#2 Post by negan » 09 Jun 2016, 19:11

Great thanks !
Stuntteam wrote:- Added: Command to invert the ON/OFF handling of the Tristate protocol
How do you use this command ?
Thank you.

Mediacj
Normal user
Posts: 24
Joined: 15 Aug 2015, 15:05

Re: RFLink release 42 is available for download

#3 Post by Mediacj » 18 Jun 2016, 20:49

negan wrote:Great thanks !
Stuntteam wrote:- Added: Command to invert the ON/OFF handling of the Tristate protocol
How do you use this command ?
Thank you.
I would like to know that to :)

Although I suppose this is not available for the Livolo switches where on=off and off=on(for me at least)

thx

rkoppen
Normal user
Posts: 10
Joined: 26 Jun 2016, 23:15

Re: RFLink release 42 is available for download

#4 Post by rkoppen » 26 Jun 2016, 23:19

Mi-Light/LimitlessLED/Applamp bridge functionality (2.4 Ghz, NRF24L01 with Milight wiring required)
Can someone elaborate on this, does this mean that you do not need a bridge ? And is a NRF24L01 needed ? Where can I find more info ?

User avatar
Stuntteam
Site Beheer
Posts: 787
Joined: 27 Jan 2016, 16:46

Re: RFLink release 42 is available for download

#5 Post by Stuntteam » 27 Jun 2016, 00:40

Correct, if you have RFLink with a NRF24L01 wired for Milight you do not need any other bridge.
you can find all details on www.nemcon.nl/blog2
the wiring page shows how to connect the NRF24L01
the Frequently Asked Questions page shows various other aspects about Milight
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

rkoppen
Normal user
Posts: 10
Joined: 26 Jun 2016, 23:15

Re: RFLink release 42 is available for download

#6 Post by rkoppen » 27 Jun 2016, 13:38

That sounds cool, I will be looking into this.

Edit: Never mind found it in the FAQ.

Now to order a milight :-)

negan
Normal user
Posts: 21
Joined: 05 Apr 2016, 16:39
Location: FR

Re: RFLink release 42 is available for download

#7 Post by negan » 06 Jul 2016, 09:34

negan wrote:Great thanks !
Stuntteam wrote:- Added: Command to invert the ON/OFF handling of the Tristate protocol
How do you use this command ?
Thank you.
Any help ?
Thank you

lukcinek22
New user
Posts: 2
Joined: 12 Jul 2016, 17:57

Re: RFLink release 42 is available for download

#8 Post by lukcinek22 » 12 Jul 2016, 18:00

Hi
Is there a possibility to use RF Link Loader with Arduino NANO instead Arduino Mega?
Best regards

User avatar
Stuntteam
Site Beheer
Posts: 787
Joined: 27 Jan 2016, 16:46

Re: RFLink release 42 is available for download

#9 Post by Stuntteam » 12 Jul 2016, 21:11

No, sorry. RFlink wont fit on a Nano.
Btw, an Arduino Mega can be bought for as low as 6 euros..
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

grz3
Normal user
Posts: 36
Joined: 21 Feb 2016, 21:47

Re: RFLink release 42 is available for download

#10 Post by grz3 » 12 Jul 2016, 22:05

is there available any smaller version of arduino mega (like nano) which will RFLINK fit into?

User avatar
Stuntteam
Site Beheer
Posts: 787
Joined: 27 Jan 2016, 16:46

Re: RFLink release 42 is available for download

#11 Post by Stuntteam » 12 Jul 2016, 23:51

Maybe the Mega Pro mini, we did not test it though.
But why would you use a smaller version?
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

lukcinek22
New user
Posts: 2
Joined: 12 Jul 2016, 17:57

Re: RFLink release 42 is available for download

#12 Post by lukcinek22 » 13 Jul 2016, 01:03

Thx for answer Stuntteam
I think I need to buy one...
Best regards

rkoppen
Normal user
Posts: 10
Joined: 26 Jun 2016, 23:15

Re: RFLink release 42 is available for download

#13 Post by rkoppen » 13 Jul 2016, 08:31

I think the questions is aimed to get a smaller form factor. do you have any plans/ideas ?

negan
Normal user
Posts: 21
Joined: 05 Apr 2016, 16:39
Location: FR

Re: RFLink release 42 is available for download

#14 Post by negan » 13 Jul 2016, 09:43

Why is my question avoided ?

User avatar
Stuntteam
Site Beheer
Posts: 787
Joined: 27 Jan 2016, 16:46

Re: RFLink release 42 is available for download

#15 Post by Stuntteam » 13 Jul 2016, 10:25

oops, not on purpose..
I think you were looking for the following commands:
10;TRISTATEINVERT=ON;
10;TRISTATEINVERT=OFF;
Not fully tested yet.
Note that when you turn invert on, ON becomes OFF and vice versa for ALL tristate devices.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

TwoEasy
New user
Posts: 3
Joined: 13 Jul 2016, 22:50

Re: RFLink release 42 is available for download

#16 Post by TwoEasy » 13 Jul 2016, 22:53

Hi guys! I encountered a problem when trying to ad milight!

It finds the milight remote very fast. But when I click to turn milight on or off it just says
"Error sending switch command, check device/hardware !" in domoticz. How do I solve this?

Voyager
Normal user
Posts: 59
Joined: 15 Apr 2015, 14:25

Re: RFLink release 42 is available for download

#17 Post by Voyager » 13 Jul 2016, 23:48

You probably need a more recent Domoticz version

TwoEasy
New user
Posts: 3
Joined: 13 Jul 2016, 22:50

Re: RFLink release 42 is available for download

#18 Post by TwoEasy » 14 Jul 2016, 13:00

Voyager wrote:You probably need a more recent Domoticz version
I am on

Version: 3.4834
Build Hash: 8398125
Compile Date: 2016-03-02 08:43:51

How do I get a more updated version?

Edit: Should I go for the beta?

3.5301 2016-07-14

(I am using a Raspberry pi 2 for domoticz)

User avatar
Stuntteam
Site Beheer
Posts: 787
Joined: 27 Jan 2016, 16:46

Re: RFLink release 42 is available for download

#19 Post by Stuntteam » 14 Jul 2016, 13:13

Yes, you will need beta..
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

TwoEasy
New user
Posts: 3
Joined: 13 Jul 2016, 22:50

Re: RFLink release 42 is available for download

#20 Post by TwoEasy » 14 Jul 2016, 13:53

Stuntteam wrote:Yes, you will need beta..
Thanks, Im really liking rflink so far!

edit: Was super quick to switch to beta, and milight instantly worked! Thank you!

the cosmic gate
Normal user
Posts: 102
Joined: 14 Nov 2015, 20:17

Re: RFLink release 42 is available for download

#21 Post by the cosmic gate » 04 Aug 2016, 22:09

anny news/ update for the next release incl mysensors ?

iMartyn
New user
Posts: 1
Joined: 20 Aug 2016, 16:15

Re: RFLink release 42 is available for download

#22 Post by iMartyn » 20 Aug 2016, 16:18

Please can we get the source uploaded?

Even better, can you put it on github and not do random google drive releases?

The nrf2401 library that I think you're using has some bugs and I'd like to use the patched/fixed version. The Milight is unreliable with some nrf2401l transmitters because of this (I think) but I can't fix it because you're only sometimes releasing source.

User avatar
Stuntteam
Site Beheer
Posts: 787
Joined: 27 Jan 2016, 16:46

Re: RFLink release 42 is available for download

#23 Post by Stuntteam » 22 Aug 2016, 17:16

It should use this: http://tmrh20.github.io/RF24/
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

the cosmic gate
Normal user
Posts: 102
Joined: 14 Nov 2015, 20:17

Re: RFLink release 42 is available for download

#24 Post by the cosmic gate » 05 Sep 2016, 11:43

is there some update about the RFLink with MySensors intergration ?

Ger
Normal user
Posts: 71
Joined: 05 Sep 2015, 18:09

Re: RFLink release 42 is available for download

#25 Post by Ger » 11 Sep 2016, 16:37

Any news about R43 and or sourcode on github?

User avatar
Stuntteam
Site Beheer
Posts: 787
Joined: 27 Jan 2016, 16:46

Re: RFLink release 42 is available for download

#26 Post by Stuntteam » 11 Sep 2016, 19:39

Target is this week..
update 16/9: slightly delayed.. nearly done..
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests