Let's Control It

Hi, i did step by step everything from totorial.
Flashing was succesfull. I am using R120 , but when start i dont see ESP_0 as AP. Try to use terminal( putty) on same port at 115000 but don't see nothing.
Can some one help me ?

btw. i am flashing sonoff RF device.

is it possibly to flash wrong image on my device ? Maybe i have to use 1mb image? Can i brick my device if i try blind shot?

Yes, use the 1MB image.

Hello,

afaik the sonof's use 1 MB Flash circuits.
If you flash another size the chip usually won't boot at all or crash immediately.

Thank's. It's work perfect now