Let's Control It

Hi guys,

my name is Remco and one of the newest members. Started last month with my domoticz project and i have to say i am hooked.


Currently running the following setup

Basic system
-Rasberry Pi 2 with a usb wifi dongel
-RFLINK with a NRF24L01
-OpenZWave USB

currently i got the following hardware connected to my system :
3x Kaku 1500R
4x kaku contact AMST_606
1x Z-wave Domitech lamp
3x Applamp RGBW
2x AK-RK01S-220-A 433MHZ 220v switch
1x CM113 z-wave 220v plug
1x ALECTO WS-1200 weatherstation
1x 433MHZ SelectPlus doorbell


And today i started experimenting with a ESP8266 nodemcu unit to build my own temperature sensor based on a dth22.

Hallo Remco,
Mijn naam is Wilfred en ik ben bezig met domoticz.
Ik vraag mij af hoe jij de AK-RK01S-220-A hebt aangesloten. Ik gebruik domoticz, maar weet niet hoe je de AK moet aansturen.
Alvast bedankt,
Wilfred