PCA9685 - ESPEASY
Posted: 13 Sep 2017, 14:59
Hi Guys!
I hope you understand me. The explanation is not very electronic.
Is there a command in ESPEASY to set the polarity of output PWM to +.
I have to put the PWM output against Vcc with a pullup restoration. But this is against any plan I have found on the Internet. Here is the comment from another forum. "For this, you have to access the Config Register 2 from the PCA directly via I2C and set the bit 2. With the Arduino IDE or ESPBASIC, no problem how to do this with ESPEASY, I unfortunately do not know."
Please help.
lg
wolfgang
I hope you understand me. The explanation is not very electronic.
Is there a command in ESPEASY to set the polarity of output PWM to +.
I have to put the PWM output against Vcc with a pullup restoration. But this is against any plan I have found on the Internet. Here is the comment from another forum. "For this, you have to access the Config Register 2 from the PCA directly via I2C and set the bit 2. With the Arduino IDE or ESPBASIC, no problem how to do this with ESPEASY, I unfortunately do not know."
Please help.
lg
wolfgang