Device tab in Espeasy dev11_dev1024
Posted: 14 Sep 2017, 09:17
Hi,
Not sure if this is the right place to pull this, but having a problem with a basic sonoff. The problem is I used the flash tool to load ESPeasy V2.0.0 -dev11_dev_1024 onto a basic 1 M sonoff. I then follow instruction on adding wifi network then fill in the other fields until I got to "devices" where I added the switch to GPIO-12 (D6) for switch and the Button GPIO 0 (D3). I couldn't find how to add the relay? I rebooted and now can access everything but "devices". If I try to access "devices" it boots me out to the login screen for the password. Any help will be highly appreicated.
Not sure if this is the right place to pull this, but having a problem with a basic sonoff. The problem is I used the flash tool to load ESPeasy V2.0.0 -dev11_dev_1024 onto a basic 1 M sonoff. I then follow instruction on adding wifi network then fill in the other fields until I got to "devices" where I added the switch to GPIO-12 (D6) for switch and the Button GPIO 0 (D3). I couldn't find how to add the relay? I rebooted and now can access everything but "devices". If I try to access "devices" it boots me out to the login screen for the password. Any help will be highly appreicated.