Smartwaves SHS-53000
Posted: 20 Nov 2017, 19:24
Hello,
Officially this device should be supported. But i have one for about 1 year and i never get a successful peering.
There is other thread with many peoples who get the same issue:
http://www.domoticz.com/forum/viewtopic ... 12#p116483
viewtopic.php?f=5&t=2645&p=20871#p12989
viewtopic.php?f=11&t=2447&p=20872#p20872
Please could someone help us ?
I use last update of RFLINK 48.4
Here you can get a debug log of my remote:
i try to add the remote by the devices tab.
I try to create ON/OFF switch manually and peer it with the valve.
I never get it working.
Thanks a lot
Officially this device should be supported. But i have one for about 1 year and i never get a successful peering.
There is other thread with many peoples who get the same issue:
http://www.domoticz.com/forum/viewtopic ... 12#p116483
viewtopic.php?f=5&t=2645&p=20871#p12989
viewtopic.php?f=11&t=2447&p=20872#p20872
Please could someone help us ?
I use last update of RFLINK 48.4
Here you can get a debug log of my remote:
I try to put "20;E1;NewKaku;ID=0011f800;SWITCH=2;CMD=ON;" in create RFLINK device.20;E1;NewKaku;ID=0011f800;SWITCH=2;CMD=ON;
20;E2;DEBUG;Pulses=132;Pulses(uSec)=240,2490,150,210,150,1230,150,210,150,1230,150,210,150,1200,150,210,150,1230,150,210,150,1230,150,1200,150,210,150,210,150,1230,150,210,150,1230,150,210,150,1230,150,1200,150,210,150,1200,150,210,150,1200,150,210,150,1230,150,210,150,1200,150,210,150,1200,150,210,150,210,150,1230,;
20;E3;DEBUG;Pulses=122;Pulses(uSec)=210,210,120,1140,120,210,120,1140,150,210,150,1140,150,1140,120,180,120,210,150,1170,150,210,150,1230,150,210,150,1230,150,1230,120,210,150,1230,150,210,150,1200,150,210,150,1200,150,210,150,1200,150,210,150,1200,150,210,150,210,150,1230,150,210,150,1230,150,210,150,1230,150,210,1;
20;E4;DEBUG;Pulses=130;Pulses(uSec)=210,210,120,1170,120,210,120,1140,150,210,120,1170,120,210,120,1230,150,210,150,1230,150,1200,150,210,150,210,150,1200,150,210,150,1230,150,210,150,1230,150,1200,150,210,150,1200,150,210,150,1230,150,210,150,1200,150,210,150,1200,150,210,150,1230,150,210,150,210,150,1230,150,210,1;
20;E5;DEBUG;Pulses=126;Pulses(uSec)=210,210,150,1140,120,210,120,1170,120,210,150,1140,120,210,150,1140,120,1170,120,180,150,210,150,1200,150,210,150,1230,150,210,150,1200,150,1200,150,210,150,1200,150,210,150,1200,150,210,150,1200,150,210,150,1230,120,2210,150,1230,150,210,150,1230,150,210,150,1230,150,210,150,1230;
;Pulses(uSec)=210,210,120,1140,150,210,120,1140,150,210,120,1200,150,1200,150,210,150,210,150,1230,150,210,150,1230,150,210,150,1230,150,1200,150,210,150,1230,150,210,150,1230,150,210,150,1230,150,210,150,1230,150,210,150,1200,150,210,150,210,150,1230,150,210,150,1200,150,210,150,1200,150,210,150,1230,150,210,120,12;
i try to add the remote by the devices tab.
I try to create ON/OFF switch manually and peer it with the valve.
I never get it working.
Thanks a lot