Problem with FUT103
Posted: 03 Mar 2018, 22:46
I recently bought FUT103, a FUT089 remote and a B8 pannel remote.
I sucessfully pair my FUT103 with both FUT089 and B8.
When I use rflink loader to monitor serial port this is what I get using FUT089 and B8 to put the light on/off
I try to mimic ON command though rflink command sending
(FUT089)
or
(B8)
commands are acknowledged OK but nothing happened on the FUT103
I also tried to pair rflink with FUT103 using
without success, command seems to be sent but nothing happen on the bulb.
What i'm doing wrong ?
I sucessfully pair my FUT103 with both FUT089 and B8.
When I use rflink loader to monitor serial port this is what I get using FUT089 and B8 to put the light on/off
I try to mimic ON command though rflink command sending
(FUT089)
Code: Select all
10;MiLightv1;2563A3;01;0000;ON;or
(B8)
Code: Select all
10;MiLightv1;2577F7;01;0000;ON;commands are acknowledged OK but nothing happened on the FUT103
I also tried to pair rflink with FUT103 using
Code: Select all
10;MiLightv1;250000;01;0000;PAIR;What i'm doing wrong ?