I connected a servo to the WeMos and tried to control this with the commands given : http://<espeasyip>/control?cmd=Servo,1,2,90
But i want to use this for blinds , so how is it possible to move the servo by any command but then in negative way ?
The reason why: i want to move this venetian blinds from the horizontal ( 0 point) to turn to the left and right so i can control the way the sun comes into the room or not
WeMos with servo control
Moderators: grovkillen, Stuntteam, TD-er
Re: WeMos with servo control
Have you tried "-90" ? (not looked into the source code to see if that would work)
I don't know the servo plugin from my own experience.
Is the "0" position the max of a range or is it the middle?
If it isn't the middle, I would suggest to try and mount either the servo or the arm connected in another position, or else it will not work at all.
I don't know the servo plugin from my own experience.
Is the "0" position the max of a range or is it the middle?
If it isn't the middle, I would suggest to try and mount either the servo or the arm connected in another position, or else it will not work at all.
Who is online
Users browsing this forum: No registered users and 36 guests