Electric Fireplace - How to decode?

Post here about devices that are not yet or not fully supported

Moderators: Voyager, BertB, rtenklooster, Stuntteam

Post Reply
Message
Author
philicibine
Normal user
Posts: 1
Joined: 06 Jan 2019, 11:28

Electric Fireplace - How to decode?

#1 Post by philicibine » 06 Jan 2019, 11:37

Hi, my first post. Been using RfLink a while and its very good.

I am struggling with an electric fireplace I bought. It uses 433 to control it. I dont think the remote has a rolling code, but everything I have tried to decode it has failed.

here is an output after switching the module to debug mode. This was pressing on/off repeatedly.

Code: Select all

0;B0;DEc)=180,240,930,930,1590,170,240,240,300,210,3000270,660,300,240,300,630330,180,360,210,330,240300,630,330,630,330,210330,420;
0;B1;DEBUG;Puses=36;Pulses(uSec)=42090,300,210,300,270,270,70,240,270,240,240,660,70,210,330,600,330,210,30,600,330,210,330,600,30,600,360,180,360,540,30,120,420,450,420;
0;B2;DEBUG;Pulses=28;Pulses(uSec)=450,390,420480,330,420,420,510,300480,390,420,360,510,360420,390,510,330,450,210330,210,360,120,420,90,60;
0;B3;DEBUGPulses=48;Pulses(uSec)=,60,2250,2820,120,210,33,210,300,210,330,240,27,270,270,270,660,300,210,270,660,300,240,300,210,330,210,330,600,330,60,330,210,330,600,360,18,390,540,390,540,420,45,510,60,5;
0;B4;DEBG;Pulses=40;Pulses(uSec)30,150,420,150,300,240,70,240,300,240,270,270,210,300,630,300,210,330,600,360,210,300,630,330,210,300,630,330,600,330,80,360,570,360,150,420,10,330,150,360;
0;B5;DEBUG;Pulses=44Pulses(uSec)=1260,6360,0,930,720,60,360,210,27,240,300,240,270,270,630300,210,300,630,360,180300,240,300,240,300,630300,630,300,210,360,600330,150,420,510,420,510420,510,420,60,390;
0;B6;DEBUG;Pulses=24Pulses(uSec)=120,360,60,360,180,330,210,330,18,360,570,390,540,390,120330,600,450,60,360,570,60,570,360;
0;B7;DEBUG;Pulses=1;Pulses(uSec)=930,120,30,150,330,210,300,210,30,240,240,270,240,270,60,300,240,270,660,330,20,300,630,300,240,300,60,330,600,330,210,360,50,360,180,390,540,420,9,360,570,360,180,360,18,36;
0;B8;Dc)=120,360,180,360,180,90,120,420,90,360,180,30,210,330,180,360,570,30,150,420,510,420,120,30;
0B9;DEBUG;Pulses=72;Pulss(uSec)=390,480,390,420390,510,360,420,390,510330,450,390,510,300,480,90,420,390,510,180,390,20,330,180,330,180,330,600,330,600,330,600,330,00,330,600,330,600,360,10,330,180,360,120,;
20;BA;DEBUG;Pulses=36;Pulses(uec)=480,480,360,420,420420,390,450,420,390,390,510,360,420,390,510,300450,420,420,180,330,210330,180,360,150,390,540420,510,420,480,480,510360;
0;BB;DEBUG;ulses=44;Pulses(uSec)=480,480,390,390,390,510,360,420,420,420,390,450,390,390,390,510,360,420,390,510,150,420,90,360,180,330,210,330,600,330,600360,600,360,570,360,570,360,570,360,150,420,90,330;
0;BC;DEBUG;Pulses=6;Pulses(uSec)=1380,1620,900,1350,690,1140,360,93,540,930,90,1230,210,180,300,240,330,210,300,240,270,270,660,270,240,30,630,330,210,330,180,30,210,300,600,330,600,33,210,330,600,330,180,3;
20;BD;DEBUG;Pulses=26;Pulses(uSec)=660,360180,360,150,390,120,360,150,360,570,360,570,360570,360,210,360,600,330,180,360,150,390,90,330;
20;BE;DEBUG;Pulss=42;Pulses(uSec)=360,480,390,420,390,510,360,420,390,510,300,480,390,420,390,510,360,420,390,510,90,360,150,330,210,330180,360,570,390,570,360,570,360,570,390,540,390540,420,90,330;
20;BF;DEBUG;Pulses=24;Pulses(uSec)=240,330,180,330,150360,90,360,150,330,570,30,180,330,570,330,180,330,120,390,60,450,420,360;
20;C0;DEBUG;Pulses=78;Pulses(uSec)=420,450,390,450,360,80,390,420,390,510,360,420,420,510,330,450,420,40,390,480,180,390,150,40,90,330,180,330,600,33,600,330,600,330,600,36,600,360,570,360,180,36,150,390,15;
20;C1;DEBUG;Pulses=54;Pulses(uSec)=480,450,420,390330,420,420,390,390,480,390,390,420,510,150,330,180,360,210,330,210,330,570,360,570,390,540,390,60,360,180,360,210,330,210,360,120,420,510,450,90,360;
BUG;Pulses=36;Pulses(uSec)=720,90,330,210,330,210,300,240,270,240,240,270,660,300,210,300,600,330,600,330,600,360,180,390,540,390,120,330,600,330;
20;C3;DEBUG;Pulses=23;Pulses(uSec)=330,60,180,330,600,330,600,330,600,330,600,330,600,360,570,360,60;
20;C4;DEBUG;ulses=30;Pulses(uSec)=30,510,360,420,390,510,10,420,90,330,210,330,21,360,600,360,600,330,60,360,570,360,570,360,57,390,120,420,60,390;
0C5;DEBUG;Pulses=53;Pulses(uSec)=240,240,30,4830360,180,330,210,300,240,300,210,300,240,660,270270,270,660,300,240,330180,330,210,300,630,300600,330,210,300,630,330210,330,600,360,570,360,70,390,150,390,90,;
0;C6;DEBU80,510,120,420,60,360,10,330,210,360,570,360,60,330,600,360,570,360,69,450,60,360;
0;C7;DEBUG;Pules=25;Pulses(uSec)=540,60,150,360,180,360,210,60,600,360,570,390,150,20,510,420,90,360,570,30,600,360,570,360,30;
0;C8;DEBUG;Pules=30;Pulses(uSec)=480,20,390,480,390,420,390,10,360,420,420,510,300,80,390,420,390,480,390,20,210,330,210,360,180,60,150,390,510,330;
0;C9;DEBUG;Pulses=3;Pulses(uSec)=30,330,60,330,180,390,540,390,50,360,570,390,120,450,60,360,570,360,180,330,60,360,30;
;CA;DEBUG;Pulses=36;Pules(uSec)=510,390,420,48,390,390,420,480,360,42,420,420,390,450,420,390390,480,390,420,210,330210,360,180,390,150,330600,330,600,330,600,360570,360;
0;CB;DEBUG;Pulses=68;ulses(uSec)=480,480,390390,420,480,330,450,420390,390,480,390,420,390510,330,450,390,510,90,30,210,330,210,360,180,60,570,390,540,390,540,20,540,390,540,420,510,30,150,360,180,360,210,3;
0;CC;DEBG;Pulses=39;Pulses(uSec=360,210,300,210,330,24,270,240,270,270,630,30,240,270,660,300,240,300,630,300,210,330,600,360,600,360,150,330,600,330,180,330,570,360,180,330,600,360,30;
20;CD;DEBUG;Pulses=40;Pulses(uSec)=300,510,150,390,120,330,180,330,180,330,600,330,600,330,600,330,600,330,600,360,570,360,150,390,90,360,180,360,210,330,180,360,570,390,150,390,540,420,90,360;
20;CE;DEBUG;Pulses=44;Pulses(uSec)=420,420,420,390,390,480,390,390,420,510,330,420,420,510,300,480,390,420,360,510,150,390,120,330,180,360,210,330,600,330,600,330,600,330,600,360,600,360,570,360,150,390,60,;
20;CF;DEBUG;Pulses=23;Pulses(uSec)=90,360,180,330,600,330,600,330,600,360,570,360,570,360,570,360,120,420,90,330,180,330,30;
20;D0;DEBUG;Pulses=46;Pulses(uSec)=450,150,330,210,300,210,270,270,270,270,660,300,240,270,630,330,210,300,240,300,210,330,600,360,600,360,150,330,570,360,180,360,570,360,570,360,600,360,180,360,150,390,540;
20;D1;DEBUG;Pulses=44;Pulses(uSec)=480,480,390,390,420,510,330,420,420,420,390,480,390,420,360,510,360,420,390,510,120,330,180,330,210,330,210,360,600,360,570,360,570390,570,360,570,360,570,360,150,420,60,3;
20;D2;DEBUG;Pulses=25;Pulses(uSec)=300,51,360,420,390,510,120,42,90,330,210,330,210,360,570,360,600,360,570,360,540,390,540,390,240;
0;D;DEBUG;Pulses=30;PulsesuSec)=450,420,390,510,30,420,390,510,360,420,40,420,390,450,390,390,39,510,360,420,210,330,210,360,180,390,150,330,60,330;
It shows nothing when I activate rffind.

Not sure where to start. Guidance is appreciated.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests