Hi
I have just flashed a mini pro (Atmega 328P) with the MiniProExtender.ino on GitHub --> https://github.com/letscontrolit/ESPEas ... roExtender
I can see the pro Extender when scanning I2C, I can also control the output of it's Port ( low and high ) so cmd=EXTGPIO works fine, But I can't output any PWM
from the Mini Pro Extender so command EXTPWM,<pin>,<level> is not working at All . am I missing something ???
Any help on this , please
ProMiniExtender PWM
Moderators: grovkillen, Stuntteam, TD-er
Re: ProMiniExtender PWM
Anyone can help on this one please? or maybe someone has the 328p hex file ready compiled, please
-
- New user
- Posts: 9
- Joined: 15 Jan 2020, 19:56
- Location: Netherlands
- Contact:
Re: ProMiniExtender PWM
i have the same problem, my led turns on when i set the level on 150.
looks like its working like a gpio instead of pwm.
Did you ever found a solution for this ?
looks like its working like a gpio instead of pwm.
Did you ever found a solution for this ?
Who is online
Users browsing this forum: No registered users and 35 guests