GPS P082 update rate

Moderators: Voyager, BertB, rtenklooster, Stuntteam, grovkillen, TD-er

Post Reply
Message
Author
muppet96
Normal user
Posts: 4
Joined: 17 May 2019, 13:31

GPS P082 update rate

#1 Post by muppet96 » 17 May 2019, 13:44

I've been trying out P082 GPS from the most recent release. It works ok but is updating via MQTT twice a second on all values despite being set to update once every 5 seconds. Under the devices tab it updates correctly at the set rate. Has anyone got any suggestions how to get it updating at the correct rate? Quite happy to fiddle with the software and re-compile if I can be helped to find where to look. Many thanks.

User avatar
grovkillen
Normal user
Posts: 2990
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:

Re: GPS P082 update rate

#2 Post by grovkillen » 17 May 2019, 14:39

Yeah, sorry but the GPS plugin is currently overriding the interval setting. We are going to create some kind of logic for that one but that's but there yet. The current status is "testing".
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:

muppet96
Normal user
Posts: 4
Joined: 17 May 2019, 13:31

Re: GPS P082 update rate

#3 Post by muppet96 » 17 May 2019, 14:52

That's great. Thanks for the reply. I know it's testing was just unsure if I had missed something or if it was a known issue.

muppet96
Normal user
Posts: 4
Joined: 17 May 2019, 13:31

Re: GPS P082 update rate

#4 Post by muppet96 » 18 May 2019, 13:45

Just for info if anybody cares, or needs, it if you set this rule:
on GPS#Longitude do
TaskValueSet 3,1,%eventvalue%
TaskValueSet 3,2,[GPS#Latitude]
TaskValueSet 3,3,[GPS#Speed]
endon
and set task 3 as dummy device with, in this case 3 sensors sending once every however many seconds and turn off sending the GPS device to controller you will achieve what the plugin is failing to do at the moment. Very inelegant I know and one of many ways it could be done but it works!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest