RF doorbell, not recognised at all

Moderators: rtenklooster, BertB, Voyager, Stuntteam

Post Reply
Message
Author
csmale
Normal user
Posts: 2
Joined: 02 Oct 2019, 17:55

RF doorbell, not recognised at all

#1 Post by csmale » 02 Oct 2019, 18:08

Hi,
I bought a 433MHz doorbell at Action. RFLink receives the signal but doesn't recognise or decode it. Using rfdebug mode I captured a couple of samples:

Code: Select all

20;D2;DEBUG;Pulses=511;Pulses(uSec)=420,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3780,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390;
20;D4;DEBUG;Pulses=511;Pulses(uSec)=450,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1890,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1890,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1890,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390;
What are my options? I understand there is some kind of plugin system. I am fairly experienced with Arduino so maybe I could make a new plugin. Can someone start me off?

Thanks!

martc
Normal user
Posts: 4
Joined: 29 Sep 2019, 00:37

Re: RF doorbell, not recognised at all

#2 Post by martc » 06 Oct 2019, 15:18

Enter learning mode acording rflink manual use "10;RFFIND=ON" and just add this doorbel transmitter, thats all. Read the manual! RFlink support 32 devices manual adding.
http://www.rflink.nl/blog2/faq#RFFind

csmale
Normal user
Posts: 2
Joined: 02 Oct 2019, 17:55

Re: RF doorbell, not recognised at all

#3 Post by csmale » 07 Oct 2019, 21:23

Great, thanks! Got it working now. I can even send a command to it from Domoticz to ring the chime, and this is exactly what I needed.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests