Orixal blinders unsupported

Post here about devices that are not yet or not fully supported

Moderators: rtenklooster, BertB, Voyager, Stuntteam

Post Reply
Message
Author
apocha
Normal user
Posts: 1
Joined: 27 Oct 2019, 19:29

Orixal blinders unsupported

#1 Post by apocha » 27 Oct 2019, 19:43

Hi,

I have Orixal blinders: http://www.orixal.fr/em14301.html
They are unsupported by Rflink R48

There are probably clones of a chinese brand.

What I know : The remote has 3 buttons: UP / STOP / DOWN.

Here is a debug log from minicom:

Code: Select all

Welcome to minicom 2.7.1                                                                                                                                                      
                                                                                                                                                                              
OPTIONS: I18n                                                                                                                                                                 
Compiled on May  6 2018, 08:02:47.                                                                                                                                            
Port /dev/ttyUSB0, 16:33:05                                                                                                                                                   
                                                                                                                                                                              
Press CTRL-A Z for help on special keys                                                                                                                                       
                                                                                                                                                                              
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48;                                                                                                                    
20;01;RFDEBUG=ON;   
I pressed 6 times on UP button:

Code: Select all

20;02;DEBUG;Pulses=460;Pulses(uSec)=600,90,480,90,420,150,420,150,420,150,420,150,420,150,390,180,390,180,390,180,390,180,390,180,360,210,390,180,390,210,390,210,390,180,390,180,360,210,360,210,360,210,360,210,360,210,360,240,360,210,360,240,360,240,330,240,330,240,360,240,360,21;
                                                                                                                                                                              
20;03;DEBUG;Pulses=468;Pulses(uSec)=480,120,420,150,420,150,420,150,420,150,390,180,390,180,420,150,420,180,420,180,390,180,390,180,390,210,360,210,360,210,360,210,390,210,360,210,360,210,390,180,360,210,360,210,360,210,360,210,360,210,330,240,330,240,360,210,360,240,330,210,360,;
                                                                                                                                                                              
20;04;DEBUG;Pulses=468;Pulses(uSec)=420,120,420,150,420,150,450,150,450,120,420,150,420,150,390,180,420,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,210,390,210,360,210,390,180,360,210,360,210,360,210,360,210,360,210,360,210,360,240,360,240,360,240,330,;
                                                                                                                                                                              
20;05;DEBUG;Pulses=444;Pulses(uSec)=450,180,420,150,390,180,420,150,390,180,390,180,420,150,390,180,390,180,390,210,390,210,360,210,360,210,390,210,360,210,360,210,360,210,360,210,360,240,360,210,360,210,360,240,360,210,330,240,360,210,360,240,330,240,330,240,360,210,330,240,330,;
                                                                                                                                                                              
20;06;DEBUG;Pulses=460;Pulses(uSec)=990,30,450,150,420,150,450,120,420,150,450,120,450,120,420,180,390,180,420,150,420,150,390,180,390,180,390,180,390,180,360,210,390,180,390,210,390,180,390,210,360,210,360,210,360,210,360,210,360,210,390,180,360,210,360,210,330,240,360,240,360,2;

20;07;DEBUG;Pulses=460;Pulses(uSec)=600,90,450,150,480,120,420,150,480,90,420,150,480,90,390,180,450,120,420,180,390,180,390,180,420,150,390,180,390,180,390,210,390,210,390,210,390,210,360,210,390,180,360,210,360,210,360,210,360,210,360,240,360,210,360,210,360,210,360,240,330,240;
I pressed 6 times on STOP button:

Code: Select all

20;08;DEBUG;Pulses=450;Pulses(uSec)=420,150,480,120,420,150,420,150,420,180,420,150,420,150,450,150,420,180,420,150,390,180,390,180,390,180,390,210,390,180,390,180,390,210,360,210,390,180,360,210,360,210,360,210,390,210,360,210,360,210,360,210,360,210,360,240,360,210,360,210,360,;

20;09;DEBUG;Pulses=470;Pulses(uSec)=120,210,1350,30,480,90,480,120,420,150,450,120,420,150,420,150,420,180,420,150,390,180,450,120,420,150,390,180,390,180,390,180,390,180,390,180,390,180,390,210,390,180,360,210,390,180,390,180,390,180,390,210,390,210,360,210,360,210,390,180,360,2;

20;0A;DEBUG;Pulses=468;Pulses(uSec)=3840,120,420,150,480,90,420,150,480,90,450,120,420,150,420,150,450,150,420,150,420,150,420,150,420,150,420,150,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,210,390,180,390,180,390,210,360,210,360,210,360,2;

20;0B;DEBUG;Pulses=454;Pulses(uSec)=510,30,480,120,450,120,450,120,450,120,420,150,450,120,420,150,420,150,420,150,420,150,420,150,420,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,210,390,180,390,210,360,2;

20;0C;DEBUG;Pulses=456;Pulses(uSec)=6630,90,450,120,450,120,420,150,420,150,420,150,420,150,420,150,420,150,420,150,420,150,420,180,420,180,420,180,390,180,390,180,420,180,390,180,420,180,390,180,390,180,390,180,390,180,390,210,390,180,390,180,390,180,390,210,390,210,390,180,390,;

20;0D;DEBUG;Pulses=446;Pulses(uSec)=2010,60,480,120,450,150,420,150,420,150,420,150,420,150,420,150,420,150,420,150,420,150,390,180,420,180,420,150,420,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,390,210,390,180,390,210,360,210,360,210,390,180,390,;
I pressed 6 times on DOWN button:

Code: Select all

20;0E;DEBUG;Pulses=470;Pulses(uSec)=180,510,420,150,450,120,480,120,450,150,450,150,420,150,420,150,420,150,420,150,390,180,390,180,420,180,390,180,390,180,420,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,360,210,390,180,360,210,360,210,360,210,390,210,360,210,360,;

20;0F;DEBUG;Pulses=458;Pulses(uSec)=480,90,1200,150,420,150,420,150,420,150,420,150,420,150,420,180,390,180,390,180,390,180,420,150,390,180,390,180,390,180,390,180,390,210,390,180,360,210,390,180,390,210,360,210,390,210,390,180,390,210,390,210,390,210,360,210,360,210,360,210,360,;

20;10;DEBUG;Pulses=460;Pulses(uSec)=930,60,450,150,480,120,420,150,540,30,420,150,420,150,420,180,420,150,420,150,420,150,420,180,450,150,390,180,390,180,390,180,390,180,390,180,390,180,390,210,360,210,360,210,390,180,390,180,390,180,360,210,390,210,360,210,360,210,360,210,360,21;

20;11;DEBUG;Pulses=464;Pulses(uSec)=600,120,450,120,420,150,450,120,420,150,420,150,420,150,420,180,420,150,390,150,420,150,420,150,420,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,360,210,390,180,390,180,360,180,390,180,390,210,360,210,360,210,360,210,360,210,360,;

20;12;DEBUG;Pulses=458;Pulses(uSec)=1350,90,540,60,510,60,450,120,540,30,450,150,420,150,450,120,420,150,390,180,420,150,420,150,420,180,390,180,390,180,390,180,390,180,390,210,360,210,390,180,390,180,390,180,390,180,390,180,390,180,390,180,360,210,360,210,390,210,360,210,360,210;

20;13;DEBUG;Pulses=452;Pulses(uSec)=2220,30,420,120,420,150,420,150,420,150,450,120,450,120,390,180,420,180,420,180,420,150,420,150,390,180,420,150,390,180,390,180,390,180,390,180,390,180,390,210,360,210,360,210,360,180,390,210,360,210,360,210,360,210,360,210,360,210,360,210,360,;
I've sent similar informations by email to frankzirrone@gmail.com.

Do you need other info to facilitate the support by Rflink?

Thanks for reading :-)

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest