Ikea ANSLUTA support
Moderators: rtenklooster, Voyager, BertB, Stuntteam
-
- New user
- Posts: 3
- Joined: 01 Feb 2016, 15:27
Ikea ANSLUTA support
Hi,
Is it possible to control the Ikea ANSLUTA with RFLink?
Thanks!
Is it possible to control the Ikea ANSLUTA with RFLink?
Thanks!
Re: Ikea ANSLUTA support
Hi,
Make a log of the remote control signal as described here:
http://www.nemcon.nl/blog2/2015/07/cc
and we will add support for it.
Protocol details are known so ti should not take long.
Make a log of the remote control signal as described here:
http://www.nemcon.nl/blog2/2015/07/cc
and we will add support for it.
Protocol details are known so ti should not take long.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- New user
- Posts: 3
- Joined: 01 Feb 2016, 15:27
Re: Ikea ANSLUTA support
I think it is not supporterd. What do you think?
http://www.ikea.com/nl/nl/catalog/products/90300773/
Anyway, thanks for your help!
http://www.ikea.com/nl/nl/catalog/products/90300773/
Anyway, thanks for your help!
Re: Ikea ANSLUTA support
That is the 2.4Ghz version. It is not supported.
There is also a 433mhz version..
There is also a 433mhz version..
-
- New user
- Posts: 3
- Joined: 01 Feb 2016, 15:27
Re: Ikea ANSLUTA support
I've read that Ikea doesn't make those anymore. They only have 2.4Ghz version. So I have bad luck.
Thanks anyway!
Thanks anyway!
Re: Ikea ANSLUTA support
Should be a nice extra....
RFlink support 2.4Ghz...
Is this perhaps possible?
RFlink support 2.4Ghz...
Is this perhaps possible?
Re: Ikea ANSLUTA support
Perhaps yes.. did anyone open one yet..?
I might pick one up when I am close to a store.
I might pick one up when I am close to a store.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Re: Ikea ANSLUTA support
is there perhaps a option that this going to work...
Is the hardware that is needed on the RFlink?
I buy one [ when i am @ Ikea ] or i will support one to a developer [ paypal ] to try it.
Is the hardware that is needed on the RFlink?
I buy one [ when i am @ Ikea ] or i will support one to a developer [ paypal ] to try it.
Re: Ikea ANSLUTA support
I picked one up at ikea..
CC2500 RF chip is used.
It will take time to analyze the signal and see if it can be implemented.
CC2500 RF chip is used.
It will take time to analyze the signal and see if it can be implemented.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Re: Ikea ANSLUTA support
Stuntteam wrote:I picked one up at ikea..
CC2500 RF chip is used.
It will take time to analyze the signal and see if it can be implemented.
Price?
What paypal?
Re: Ikea ANSLUTA support
Support for the 2.4Ghz Ansluta has now been integrated in RFLink
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Normal user
- Posts: 39
- Joined: 09 Aug 2016, 09:45
Re: Ikea ANSLUTA support
Stuntteam wrote:Support for the 2.4Ghz Ansluta has now been integrated in RFLink
Ansulta works also with NRF24L01 ??
We need a CC2500??
Regards!
Re: Ikea ANSLUTA support
Ansluta is not working with the NRF24L01.. it only works with the CC2500
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Normal user
- Posts: 39
- Joined: 09 Aug 2016, 09:45
Re: Ikea ANSLUTA support
Hi
Thanks for your quick answer....
Its a good new!! I'm going to order a CC2500!
Regards!
Thanks for your quick answer....
Its a good new!! I'm going to order a CC2500!
Regards!
Who is online
Users browsing this forum: No registered users and 1 guest