Home Assistant to RFLnk to somfy covers
Posted: 15 Apr 2020, 23:03
Hello,
I'm running Home Assistant on a PI3.
I use RFLink connected to that PI and I can receive data from the RFLink.
Now I want to integrate my RTS somfy covers (volets).
I followed the instructions to pair the cover with RFLink using RFlink loader and my PC.
I can send this command :
10;RTS;02FFFF;0;down
and the cover is going down.
Now I'm plugging RFlink to the PI and have in my configuration.yaml:
cover:
- platform: rflink
devices:
rts_d61447_01:
name: voletsalon
(bad indent do to copy/paste)
the name of the cover (voletsalon) is recognised in the logs.
But nothing happen.
I put the RFLINK as close to the cover as possible and as far from the PI as possible....no move!
Any help welcome!
Thank you
I'm running Home Assistant on a PI3.
I use RFLink connected to that PI and I can receive data from the RFLink.
Now I want to integrate my RTS somfy covers (volets).
I followed the instructions to pair the cover with RFLink using RFlink loader and my PC.
I can send this command :
10;RTS;02FFFF;0;down
and the cover is going down.
Now I'm plugging RFlink to the PI and have in my configuration.yaml:
cover:
- platform: rflink
devices:
rts_d61447_01:
name: voletsalon
(bad indent do to copy/paste)
the name of the cover (voletsalon) is recognised in the logs.
But nothing happen.
I put the RFLINK as close to the cover as possible and as far from the PI as possible....no move!
Any help welcome!
Thank you