Page 1 of 1
VS1053 mp3 decoder support
Posted: 12 Sep 2020, 21:13
by mackowiakp
Is VS1053 MP3 decoder or similar in the project supported? I did not find a suitable module in the repository. But maybe I missed something.
The goal was to make an internet radio. Such projects are on GitHub, such as
https://github.com/karawin/Ka-Radio.
But I would prefer to base all ESPs on the same software. Or maybe one of the colleagues has a prototype?
Re: VS1053 mp3 decoder support
Posted: 12 Sep 2020, 21:38
by TD-er
There is support for another MP3 module, but not for this one as far as I can see.
Re: VS1053 mp3 decoder support
Posted: 13 Sep 2020, 08:35
by mackowiakp
Yes, the MP3 player module is supported. But it is a module that plays mp3 files stored on an SD card. The slot for such card is located on the module.
Well, so once I get the VS1053 module from Ali, I'll have to write something myself. Based on the project mentioned above but compatible with easyESP.
Re: VS1053 mp3 decoder support
Posted: 13 Sep 2020, 10:27
by TD-er
Looking forward to the pull request
Re: VS1053 mp3 decoder support
Posted: 12 Sep 2024, 19:37
by bubastic
mackowiakp wrote: ↑13 Sep 2020, 08:35
Well, so once I get the VS1053 module from Ali, I'll have to write something myself. Based on the project mentioned above but compatible with easyESP.
It's been four years
Re: VS1053 mp3 decoder support
Posted: 13 Sep 2024, 07:08
by mackowiakp
Yep. Home Assistant music streaming to MPD players kill the project