Let's Control It

Hi,
could someone post RF codes for Falmec fans?
I just got one without a remote and would love to contol that with arduino +rf antena.
Seller said that all their products got receiver built in.

light on
20;E9;DEBUG;Pulses=34;Pulses(uSec)=240,210,480,480,180,480,180,480,180,480,180,480,180,480,180,480,180,480,180,210,450,480,180,480,180,480,180,210,480,480,180,510,180,6990;
20;EA;FALMEC;ID=7900;SWITCH=01;CMD=ON;

light off
20;EE;DEBUG;Pulses=34;Pulses(uSec)=330,210,480,480,180,480,180,480,180,510,180,510,180,480,180,480,180,480,180,480,180,480,180,510,180,480,180,210,480,480,180,480,180,6990;
20;EF;FALMEC;ID=7900;SWITCH=01;CMD=OFF;

fun speed 1
20;0F;DEBUG;Pulses=34;Pulses(uSec)=240,210,450,510,180,480,180,480,180,480,180,480,180,510,180,510,180,210,480,480,180,480,180,480,180,510,180,210,450,510,180,480,180,6990;
20;10;FALMEC;ID=7901;SWITCH=01;CMD=OFF;

fun speed 2
20;20;DEBUG;Pulses=34;Pulses(uSec)=240,210,450,480,180,510,180,480,180,480,180,480,180,480,180,210,480,480,180,480,180,480,180,480,180,480,180,210,450,480,180,480,180,6990;
20;21;FALMEC;ID=7902;SWITCH=01;CMD=OFF;

fun speed 3
20;23;DEBUG;Pulses=34;Pulses(uSec)=180,210,480,510,180,510,180,480,180,480,180,480,180,480,180,210,480,210,450,510,180,480,180,480,180,480,180,210,450,480,180,510,180,6990;
20;24;FALMEC;ID=7903;SWITCH=01;CMD=OFF;

fun speed 4
20;3F;DEBUG;Pulses=34;Pulses(uSec)=240,210,450,480,180,510,180,510,180,510,180,480,180,210,480,480,180,510,180,510,180,510,180,480,180,480,180,210,480,480,180,480,180,6990;
20;40;DEBUG;Pulses=34;Pulses(uSec)=240,210,480,480,180,480,180,480,180,480,180,510,180,210,450,510,180,480,180,480,180,480,180,510,180,510,180,210,480,480,180,480,180,6990;

back to switch fun off

fun speed 3
20;52;DEBUG;Pulses=34;Pulses(uSec)=330,210,450,510,180,480,180,480,180,480,180,510,180,510,180,210,480,210,480,480,180,480,180,480,180,510,180,210,450,510,180,480,180,6990;
20;53;FALMEC;ID=7903;SWITCH=01;CMD=OFF;

fun speed 2
20;77;DEBUG;Pulses=34;Pulses(uSec)=330,210,480,480,180,480,180,480,180,510,180,510,180,510,180,210,480,480,180,480,180,480,180,510,180,480,180,210,480,480,180,480,180,6990;
20;78;FALMEC;ID=7902;SWITCH=01;CMD=OFF;

fun speed 1
20;8B;DEBUG;Pulses=34;Pulses(uSec)=150,210,450,510,180,510,180,510,180,480,180,480,180,480,180,510,180,210,480,480,180,480,180,510,180,480,180,210,450,510,180,510,180,6990;
20;8C;FALMEC;ID=7901;SWITCH=01;CMD=OFF;

fun off
20;95;DEBUG;Pulses=34;Pulses(uSec)=150,210,480,480,180,480,180,510,180,510,180,510,180,480,180,480,180,480,180,480,180,510,180,510,180,480,180,210,480,480,180,480,180,6990;
20;96;FALMEC;ID=7900;SWITCH=01;CMD=OFF;

Thank You, i will test them today

sending those codes doesnt work.
10;FALMEC;7900;01;ON; - 433 sniffer doesnt detect anything.
My test board is working properly i can capture and resend codes from other remotes.
Falmec doesnt work unfortunetly.
I dont have physical remote for that fan to run some tests :/