use of 4 YFS401 flow sensors

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
marktn
Normal user
Posts: 62
Joined: 06 Nov 2015, 19:43

use of 4 YFS401 flow sensors

#1 Post by marktn » 18 Jun 2022, 00:10

Is it possible to connect 4, YFS401 flow sensors to 1 esp?

Thanks, Mark

User avatar
Ath
Normal user
Posts: 3418
Joined: 10 Jun 2018, 12:06
Location: NL

Re: use of 4 YFS401 flow sensors

#2 Post by Ath » 18 Jun 2022, 09:05

When using a recent ESPEasy version that should be possible.
You might want to use a level converter, as the VCC range for that sensor is from 5V..24V, and the ESP inputs are specified at 3.3V, but there are reports that especially the Wemos D1 mini (clones) and NodeMCU (clones) boards will handle the ~5V signal without damage. (I prefer the safe option ;))
/Ton (PayPal.me)

marktn
Normal user
Posts: 62
Joined: 06 Nov 2015, 19:43

Re: use of 4 YFS401 flow sensors

#3 Post by marktn » 18 Jun 2022, 11:45

Ath wrote: 18 Jun 2022, 09:05 When using a recent ESPEasy version that should be possible.
You might want to use a level converter, as the VCC range for that sensor is from 5V..24V, and the ESP inputs are specified at 3.3V, but there are reports that especially the Wemos D1 mini (clones) and NodeMCU (clones) boards will handle the ~5V signal without damage. (I prefer the safe option ;))
Thanks! I will do that.

Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests