Code: Select all
INIT : Booting version: HEAD_56d3225 (ESP82xx Core 2843a5ac, NONOS SDK 2.2.2-dev(38a443e), LWIP: 2.1.2 PUYA support)
181 : Info : INIT : Free RAM:30056
182 : Info : INIT : Soft Reboot #80 - Restart Reason: Software/System restart
183 : Info : FS : Mounting...
208 : Info : FS : Mount successful, used 76053 bytes of 957314
310 : Info : FS : Success garbage collection
327 : Info : CRC : SecuritySettings CRC ...OK
329 : Info : INIT : I2C
330 : Info : INIT : SPI not enabled
342 : Info : Time set to 84559.000 Time adjusted by 84558659.00 msec. Wander: 0.000 msec/second Source: RTC at boot
343 : Info : Current Time Zone: STD time start: 1970-10-25 03:00:00 offset: 0 min
345 : Info : Local time: 1970-01-01 23:29:19
357 : Info : WiFi : Start network scan all channels
369 : Info : INIT : Free RAM:26976
387 : Info : Ser2net : WiFi server closed
605 : Info : INFO : Plugins: 79 [Normal] [Testing] [TEST_A] (ESP82xx Core 2843a5ac, NONOS SDK 2.2.2-dev(38a443e), LWIP: 2.1.2 PUYA support)
606 : Info : EVENT: System#Wake
616 : Info : Cache rules event: rules1.txt pos: 0 on Clock#Time=All,00:30 do
618 : Info : Cache rules event: rules1.txt pos: 44 on Clock#Time=All,12:30 do
706 : Info : Webserver: start
718 : Info : EVENT: System#Boot
732 : Info : EVENT: Time#Initialized
798 : Info : EVENT: TaskInit#lcd=1,0
845 : Info : EVENT: TaskInit#motion=2,1
879 : Info : EVENT: motion#motion=1
1546 : Info : EVENT: Clock#Time=Thu,23:29
2079 : Info : WD : Uptime 0 ConnectFailures 0 FreeMem 19232 WiFiStatus 0 ESPeasy internal wifi status: DISCONNECTED
2758 : Info : WiFi : Scan finished, found: 3
2761 : Info : WiFi : Best AP candidate: xxx 74:AC:B9:xx:xx:xx Ch:11 (-48dBm) WPA2/PSK
2762 : Info : WIFI : Connecting xxx 74:AC:B9:xx:xx:xx Ch:11 (-48dBm) WPA2/PSK attempt #0
2764 : Info : IP : Static IP : 192.168.0.43 GW: 192.168.0.1 SN: 255.255.255.0 DNS: 8.8.8.8
3735 : Info : WIFI : Connected! AP: xxx (74:AC:B9:xx:xx:xx) Ch: 11 Duration: 970 ms
3736 : Info : WIFI : Static IP: 192.168.0.43 (test) GW: 192.168.0.1 SN: 255.255.255.0 duration: 2 ms
Code: Select all
387 : Info : Ser2net : WiFi server closed
How do I get the Ser2net plugin to wait until the WiFi is connected?