The Thermosensors plugin does not work
Moderators: grovkillen, Stuntteam, TD-er
- Andrew Mamohin
- Normal user
- Posts: 95
- Joined: 12 Jun 2020, 08:30
- Location: Belarus, Gomel
- Contact:
The Thermosensors plugin does not work
The Thermosensors plugin does not work with the MAX6675 module in version ESP_Easy_mega_20230930 for S2.
The temperature is always equal NAN.
When I flash version 20230822 the plugin works fine.
The temperature is always equal NAN.
When I flash version 20230822 the plugin works fine.
Andy.
Re: The Thermosensors plugin does not work
How is SPI configured?
I assume you've checked the wiring 3 times? (like I usually do if something won't work as expected)
I assume you've checked the wiring 3 times? (like I usually do if something won't work as expected)
/Ton (PayPal.me)
- Andrew Mamohin
- Normal user
- Posts: 95
- Joined: 12 Jun 2020, 08:30
- Location: Belarus, Gomel
- Contact:
Re: The Thermosensors plugin does not work
Hi!
Yes, I checked. This device has been working for some time on the firmware 20230822. I tried several times to flash firmware 20230930, but I always get nan.
And now the device works well on 20230822.
Yes, I checked. This device has been working for some time on the firmware 20230822. I tried several times to flash firmware 20230930, but I always get nan.
And now the device works well on 20230822.
Andy.
Re: The Thermosensors plugin does not work
Which exact build are you using? (filename)
I did remove quite a lot of "excessive logs" etc. from that plugin and wrapped it in "#ifndef BUILD_NO_DEBUG" or "#ifndef LIMIT_BUILD_SIZE"
So it might be possible there was something done in such log-only code blocks. But that would probably have been a bug anyway as those would then not be executed if log level was not set.
Have to check the code changes to be sure.
I did remove quite a lot of "excessive logs" etc. from that plugin and wrapped it in "#ifndef BUILD_NO_DEBUG" or "#ifndef LIMIT_BUILD_SIZE"
So it might be possible there was something done in such log-only code blocks. But that would probably have been a bug anyway as those would then not be executed if log level was not set.
Have to check the code changes to be sure.
Re: The Thermosensors plugin does not work
Can you check this PR when it is ready building?
https://github.com/letscontrolit/ESPEasy/pull/4836
GH Actions build: https://github.com/letscontrolit/ESPEas ... 6389659984
https://github.com/letscontrolit/ESPEasy/pull/4836
GH Actions build: https://github.com/letscontrolit/ESPEas ... 6389659984
- Andrew Mamohin
- Normal user
- Posts: 95
- Joined: 12 Jun 2020, 08:30
- Location: Belarus, Gomel
- Contact:
Re: The Thermosensors plugin does not work
Yes! This build works. Thank you! You fix bugs amazingly quickly!
Andy.
Re: The Thermosensors plugin does not work
Sadly not as quick as I write them...
Who is online
Users browsing this forum: No registered users and 15 guests