I have a fairly vanilla RPiEasy system (RPIEasy 2.3.273) running on an older RPi.
I have set gpio2 and gpio3 to be outputs, via the hardware page and I have rebooted the RPi.Type: RPI-Linux-apt (supported)
OS: linux 6.1.0-rpi4-rpi-v6
OS full name: Raspbian GNU/Linux 12 (bookworm)
Hardware: Pi 1 Model B 512MB
when I issue the simple command 'gpio.2.1' (or gpio,3.1), as I am used to doing on ESPeasy systems, I get error as follows:
Is there some documentation somewhere I should be referring to, to figure out what I am doing wrong?False
16:00:19 : Webserver starting at http://192.168.55.151:80
16:01:12 : CMD: gpio,2,1
16:01:12 : Unknown command: gpio,2,1
17:01:15 : CMD: gpio,2,1
17:01:15 : Unknown command: gpio,2,1
Thoughts or advice welcome.
Cheers,
Brian H.