LaCrosse with TX141TH-BV3 sensor
Posted: 26 Dec 2023, 14:44
Hello,
First of all, thanks for all of this work, i enjoy the RFLINK for 4 years now, since the R48 version.
I was really happy when R50 was released as I thought it was able to recognize my LaCrosse sensor TX141TH-BV3, but seems not.
I sent some years ago the debug to include this device but i did not received feedback so i thought it was already included in the dev version during these past years.
So today, i updated to R50, but nothing about the LaCrosse sensor in the logs.
Here is an example of the debug when receiving a frame:
20;43;DEBUG;Pulses=511;Pulses(uSec)=2520,570,900,570,900,570,510,60,240,300,480,60,240,270,480,60,240,270,270,240,270,270,300,210,240,300,240,300,240,300,240,330,240,300,450,60,210,300,210,300,450,90,210,300,210,330,240,300,450,90,450,90,450,90,210,330,450,90,210,330,210,330,210,330,420,90,210,330,450,90,420,90,210,330,210,330,420,120,420,120,420,90,210,330,420,90,210,360,780,690,780,690,780,690,780,690,420,120,180,330,420,120,180,360,420,120,180,360,180,360,150,360,180,360,150,360,150,360,180,360,180,360,180,360,420,120,180,360,180,360,390,120,180,360,150,360,150,360,390,120,420,120,420,120,150,360,390,120,150,360,150,390,150,360,420,120,150,360,420,120,390,150,150,360,150,360,390,120,420,120,390,120,150,390,390,120,150,420,750,720,750,720,750,720,750,720,390,150,150,390,390,150,150,390,390,120,150,390,150,390,150,360,150,390,150,390,150,390,150,390,150,390,150,360,390,120,150,390,150,390,390,150,150,390,150,390,150,390,390,150,390,150,390,150,150,390,390,150,150,390,150,390,150,390,390,150,150,390,390,150,390,150,150,390,150,390,390,150,390,150,390,150,150,390,390,150,120,420,720,720,750,750,720,750,720,720,390,150,120,420,360,150,120,420,360,150,150,390,150,390,120,390,120,390,150,390,120,420,120,390,150,390,150,390,390,150,150,390,150,390,390,150,120,390,150,390,120,390,360,150,360,150,390,150,120,390,360,150,150,390,120,420,120,420,360,150,120,390,360,150,360,150,120,390,120,390,360,150,360,150,360,150,120,420,360,150,360,180,720,750,720,750,720,750,720,750,360,180,120,420,360,180,120,420,360,180,120,420,120,420,120,420,120,420,120,420,120,420,120,390,120,420,120,420,360,180,120,420,120,420,360,180,120,420,120,420,120,420,360,150,360,150,360,180,120,420,360,180,120,420,120,420,120,420,360,150,120,420,360,180,360,150,120,420,120,420,360,180,360,180,360,180,120,420,360,180,120,450,690,750,720,750,720,750,720,750,360,150,120,420,360,180,120,420,360,180,120,420,120,420,120,420,120,420,120,420,120,420,120,420,90,420,120,420,360,180,120,420,120,420,360,180,120,420,90,420,120,420,360,180,360,180,360,180,120,420,360,180,120,420,90;
The corresponding values for this frame are : TEMP 8.3° / HUM 69%
Can you confirm the device is not handle ?
Will it be possible to include it one day ?
Let me know if more debug is needed.
Thanks.
First of all, thanks for all of this work, i enjoy the RFLINK for 4 years now, since the R48 version.
I was really happy when R50 was released as I thought it was able to recognize my LaCrosse sensor TX141TH-BV3, but seems not.
I sent some years ago the debug to include this device but i did not received feedback so i thought it was already included in the dev version during these past years.
So today, i updated to R50, but nothing about the LaCrosse sensor in the logs.
Here is an example of the debug when receiving a frame:
20;43;DEBUG;Pulses=511;Pulses(uSec)=2520,570,900,570,900,570,510,60,240,300,480,60,240,270,480,60,240,270,270,240,270,270,300,210,240,300,240,300,240,300,240,330,240,300,450,60,210,300,210,300,450,90,210,300,210,330,240,300,450,90,450,90,450,90,210,330,450,90,210,330,210,330,210,330,420,90,210,330,450,90,420,90,210,330,210,330,420,120,420,120,420,90,210,330,420,90,210,360,780,690,780,690,780,690,780,690,420,120,180,330,420,120,180,360,420,120,180,360,180,360,150,360,180,360,150,360,150,360,180,360,180,360,180,360,420,120,180,360,180,360,390,120,180,360,150,360,150,360,390,120,420,120,420,120,150,360,390,120,150,360,150,390,150,360,420,120,150,360,420,120,390,150,150,360,150,360,390,120,420,120,390,120,150,390,390,120,150,420,750,720,750,720,750,720,750,720,390,150,150,390,390,150,150,390,390,120,150,390,150,390,150,360,150,390,150,390,150,390,150,390,150,390,150,360,390,120,150,390,150,390,390,150,150,390,150,390,150,390,390,150,390,150,390,150,150,390,390,150,150,390,150,390,150,390,390,150,150,390,390,150,390,150,150,390,150,390,390,150,390,150,390,150,150,390,390,150,120,420,720,720,750,750,720,750,720,720,390,150,120,420,360,150,120,420,360,150,150,390,150,390,120,390,120,390,150,390,120,420,120,390,150,390,150,390,390,150,150,390,150,390,390,150,120,390,150,390,120,390,360,150,360,150,390,150,120,390,360,150,150,390,120,420,120,420,360,150,120,390,360,150,360,150,120,390,120,390,360,150,360,150,360,150,120,420,360,150,360,180,720,750,720,750,720,750,720,750,360,180,120,420,360,180,120,420,360,180,120,420,120,420,120,420,120,420,120,420,120,420,120,390,120,420,120,420,360,180,120,420,120,420,360,180,120,420,120,420,120,420,360,150,360,150,360,180,120,420,360,180,120,420,120,420,120,420,360,150,120,420,360,180,360,150,120,420,120,420,360,180,360,180,360,180,120,420,360,180,120,450,690,750,720,750,720,750,720,750,360,150,120,420,360,180,120,420,360,180,120,420,120,420,120,420,120,420,120,420,120,420,120,420,90,420,120,420,360,180,120,420,120,420,360,180,120,420,90,420,120,420,360,180,360,180,360,180,120,420,360,180,120,420,90;
The corresponding values for this frame are : TEMP 8.3° / HUM 69%
Can you confirm the device is not handle ?
Will it be possible to include it one day ?
Let me know if more debug is needed.
Thanks.