Difference between revisions of "Tutorial Arduino Firmware Upload"
| Line 71: | Line 71: | ||
Finally, upload the sketch to your ESP board: | Finally, upload the sketch to your ESP board: | ||
| − | [[File: | + | [[File:Tutorial_FirmWare_Easy9.png]] |
Revision as of 17:50, 31 August 2015
Download and install Arduino 1.6.5. from https://www.arduino.cc/en/Main/Software
Launch arduino.exe and select preferences
Enter the URL for additional boards. Currently we use the staging version so you should enter:
http://arduino.esp8266.com/staging/package_esp8266com_index.json
Now navigate to the board manager
You should see the ESP option
Click install (this will take some time, be patient, it should download approx. 450 MB)
Download ESP Easy Firmware
Download the latest version from sourceforge: http://sourceforge.net/projects/espeasy/files
The zipfile contains two folders. Unpack the zipfile to some folder of your own choice
The libraries folder has 3 libraries. These folder should be copied to the Arduino libraries folder
This is the folder structure for Arduino IDE. You can see the libraries folder in here.
Once the additional libraries are copied, it should look like this:
Compile and upload
Launch Arduino IDE and navigatie to the ESPEasy folder. Open ESPEasy.ino
It's important the select the right ESP board. In our case we use the NodeMCU V1.0 board:
And select the right COM port:
Finally, upload the sketch to your ESP board:
